What is the purpose of configuring a default gateway on a switch?

To provide DNS resolution for the switch

To increase the speed of the management port

To enable routing between VLANs on the switch

To allow the switch to be managed from a different subnet

During the initial setup wizard on a Dell switch, the admin is prompted for a hostname and a management IP. The admin wants to skip the wizard and configure the switch manually. What is the MOST efficient way to proceed?

Exit the wizard and use CLI commands in configuration mode to set the hostname and management IP.

Complete the wizard with default values and then change the settings later.

Use the web interface to configure the switch instead of the wizard.

Reboot the switch to restart the wizard and try again.

What is the primary purpose of the initial configuration dialog (setup wizard) on a switch?

To automatically configure all interfaces with optimal VLAN settings

To guide the administrator through setting basic parameters like hostname, passwords, and management IP

To download the latest firmware from the vendor

To run a diagnostic test on all hardware components

A security-conscious admin is configuring a Dell switch for remote management. The admin creates a local user account 'admin' with a strong password and enables SSH. The admin also sets an enable password. Which additional configuration is MOST important to ensure passwords are not transmitted or stored in plaintext?

Save the configuration immediately after creating the user account.

Use the 'service password-encryption' command to encrypt all passwords in the configuration file.

Disable Telnet and HTTP access to the switch.

Set the enable password to the same as the local user password for consistency.

What is the purpose of setting an enable password on a switch?

To prevent unauthorized access to the console port

To encrypt all traffic on the switch

To authenticate users when they connect via SSH

To restrict access to privileged EXEC mode

Dell Networking Foundations

Domain 1Objective 3

Describe the Steps and Settings Used for the Initial Configuration of a Switch NETWORKING-FOUNDATIONS Practice Questions (Page 2)

Part of the Networking Essentials domain, which accounts for 5% of the NETWORKING-FOUNDATIONS exam.

29questions here

6free pages

9concepts

5%of the exam

Questions 6–10

6foundation · easy
What is the purpose of configuring a default gateway on a switch?
Select an answer first
7application · medium
During the initial setup wizard on a Dell switch, the admin is prompted for a hostname and a management IP. The admin wants to skip the wizard and configure the switch manually. What is the MOST efficient way to proceed?
Select an answer first
8foundation · easy
What is the primary purpose of the initial configuration dialog (setup wizard) on a switch?
Select an answer first
9application · medium
A security-conscious admin is configuring a Dell switch for remote management. The admin creates a local user account 'admin' with a strong password and enables SSH. The admin also sets an enable password. Which additional configuration is MOST important to ensure passwords are not transmitted or stored in plaintext?
Select an answer first
10foundation · easy
What is the purpose of setting an enable password on a switch?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to NETWORKING-FOUNDATIONS

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “NETWORKING-FOUNDATIONS” is a trademark of its owner, used for identification only.