A network administrator is configuring a Cisco router as a DHCP server for a network with two subnets: 192.168.60.0/24 and 192.168.61.0/24. The router has interfaces on both subnets. The administrator wants to configure DHCP so that clients on each subnet receive addresses from the appropriate pool. Which configuration is correct?

Create one DHCP pool and use 'ip helper-address' on both interfaces

Create one DHCP pool with two network commands

Create two separate DHCP pools, one for each subnet

Create one DHCP pool with a network command of 192.168.60.0 255.255.254.0

A company has a Cisco router configured as a DHCP server with a pool for 192.168.40.0/24. The pool is nearly exhausted. The administrator wants to expand the pool to include the 192.168.41.0/24 subnet, which is directly connected to the router. The administrator also wants to ensure that clients on both subnets can obtain addresses. Which configuration change is required?

Add a second DHCP pool for 192.168.41.0/24

Modify the existing pool's network command to 192.168.40.0 255.255.254.0

Add 'ip helper-address' on the interface for 192.168.41.0/24

Add a second network command in the existing pool

Dell Networking Foundations

Domain 4Objective 1

Identify the Commands to Configure and Verify the Operation of DHCP NETWORKING-FOUNDATIONS Practice Questions (Page 1)

Part of the Network Services domain, which accounts for 5% of the NETWORKING-FOUNDATIONS exam.

7questions here

2free pages

2concepts

5%of the exam

Questions 1–5

1foundation · easy
A Cisco IOS router is configured as a DHCP relay agent to forward DHCP broadcasts from clients on one subnet to a DHCP server on another subnet. Which command enables DHCP relay on an interface?
Select an answer first
2application · easy
A network administrator is troubleshooting a DHCP issue where clients are receiving IP addresses that conflict with statically assigned addresses on the network. The administrator wants to see if the DHCP server has detected any address conflicts. Which command should be used?
Select an answer first
3expert · hard
A network administrator is configuring a Cisco router as a DHCP server for a network with two subnets: 192.168.60.0/24 and 192.168.61.0/24. The router has interfaces on both subnets. The administrator wants to configure DHCP so that clients on each subnet receive addresses from the appropriate pool. Which configuration is correct?
Select an answer first
4expert · hard
A company has a Cisco router configured as a DHCP server with a pool for 192.168.40.0/24. The pool is nearly exhausted. The administrator wants to expand the pool to include the 192.168.41.0/24 subnet, which is directly connected to the router. The administrator also wants to ensure that clients on both subnets can obtain addresses. Which configuration change is required?
Select an answer first
5foundation · easy
A network administrator needs to see a list of all IP addresses that have been leased to DHCP clients, along with their lease expiration times. Which command displays this information on a Cisco IOS router?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to NETWORKING-FOUNDATIONS

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “NETWORKING-FOUNDATIONS” is a trademark of its owner, used for identification only.

Identify the Commands to Configure and Verify the Operation of DHCP NETWORKING-FOUNDATIONS Practice Questions (Page 1)

Questions 1–5

A Cisco IOS router is configured as a DHCP relay agent to forward DHCP broadcasts from clients on one subnet to a DHCP server on another subnet. Which command enables DHCP relay on an interface?

A network administrator is troubleshooting a DHCP issue where clients are receiving IP addresses that conflict with statically assigned addresses on the network. The administrator wants to see if the DHCP server has detected any address conflicts. Which command should be used?

A network administrator needs to see a list of all IP addresses that have been leased to DHCP clients, along with their lease expiration times. Which command displays this information on a Cisco IOS router?

Keep studying — Network Services