Which pre-installation check verifies that the site can support the ECS system?

Confirming that the rack has a minimum of 42U of free space

Confirming that the site has a backup internet connection

Confirming that the site has a fire suppression system

Confirming that the power and cooling are within the specified ranges

What network prerequisite is typically required at an ECS installation site?

Sufficient switch ports and cabling for all planned connections

A dedicated VLAN for each individual node

A DMZ with public-facing IP addresses for all nodes

A wireless access point for each rack

A data center is being prepared for an ECS installation. The room has a cooling capacity of 100,000 BTU/hr, but the ECS nodes will generate 120,000 BTU/hr of heat. The administrator must ensure the site meets cooling requirements. What should the administrator do?

Proceed with installation and monitor temperatures

Upgrade the cooling system to handle at least 120,000 BTU/hr

Install additional fans in the rack to supplement cooling

Reduce the number of nodes to lower the heat output

A company is preparing a site for an ECS installation. The site has a limited power budget, and the ECS nodes require a total of 20 kW. The facility can provide 15 kW. The administrator must find a way to meet the power requirement. What should the administrator do?

Proceed with installation and hope the power is sufficient

Upgrade the facility's power infrastructure to provide at least 20 kW

Reduce the number of nodes to lower the power requirement

Use a generator to supplement the power supply

A data center is being prepared for an ECS installation. The facility has a single-phase power supply, but the ECS nodes require three-phase power. The administrator must ensure the site meets power requirements. What should the administrator do?

Contact the facilities team to upgrade the power supply to three-phase

Use a power distribution unit (PDU) to convert single-phase to three-phase

Install the ECS nodes anyway and rely on the UPS to handle the load

Reduce the number of nodes to lower the power requirement

Dell ECS Deploy

Domain 2Objective 1

Prepare the Site and ECS System for Installation ECS-DEPLOY Practice Questions (Page 3)

Part of the ECS Implementation domain, which accounts for 36% of the ECS-DEPLOY exam.

24questions here

5free pages

5concepts

36%of the exam

Questions 11–15

11foundation · easy
Which pre-installation check verifies that the site can support the ECS system?
Select an answer first
12foundation · easy
What network prerequisite is typically required at an ECS installation site?
Select an answer first
13expert · medium
A data center is being prepared for an ECS installation. The room has a cooling capacity of 100,000 BTU/hr, but the ECS nodes will generate 120,000 BTU/hr of heat. The administrator must ensure the site meets cooling requirements. What should the administrator do?
Select an answer first
14expert · medium
A company is preparing a site for an ECS installation. The site has a limited power budget, and the ECS nodes require a total of 20 kW. The facility can provide 15 kW. The administrator must find a way to meet the power requirement. What should the administrator do?
Select an answer first
15application · medium
A data center is being prepared for an ECS installation. The facility has a single-phase power supply, but the ECS nodes require three-phase power. The administrator must ensure the site meets power requirements. What should the administrator do?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to ECS-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “ECS-DEPLOY” is a trademark of its owner, used for identification only.