Install the ECS Core OS and Configure Network Separation and Network Configuration ECS-DEPLOY Practice Questions (Page 1)

Questions 1–5

1. 1application · easy

   After configuring the ECS core OS and network settings, an administrator wants to verify that the node can reach the management gateway. Which command should be used?

   • Aip addr show
   • Barp -a
   • Croute -n
   • Dping 192.168.1.1
   Reveal Solution Discussion Select an answer first
2. 2foundation · easy

   What is the purpose of verifying the network configuration after an ECS deployment?

   • ATo configure VLANs on the switches
   • BTo assign IP addresses to the nodes
   • CTo install the ECS core operating system
   • DTo ensure that all required services and connectivity are operational
   Reveal Solution Discussion Select an answer first
4. 3foundation · easy

   During an ECS deployment, which step is performed first when installing the ECS core operating system on a physical node?

   • AAssign IP addresses to the management interfaces
   • BVerify the network configuration
   • CBoot the node from the ECS installation media
   • DConfigure the network interfaces and VLANs
   Reveal Solution Discussion Select an answer first
5. 4application · medium

   An administrator is configuring IP addressing for an ECS node. The management network uses the 192.168.10.0/24 subnet, and the storage network uses 10.0.0.0/16. The node must be able to reach the management gateway at 192.168.10.1 and the storage gateway at 10.0.0.1. What is the correct routing configuration to ensure both networks are reachable?

   • AAdd a default route pointing to the management gateway and a static route for the storage subnet pointing to the storage gateway.
   • BAdd a single default route pointing to the storage gateway for all traffic.
   • CAdd a static route for the management subnet pointing to the storage gateway and a default route to the management gateway.
   • DDo not configure any routes; rely on the switch to forward traffic between subnets.
   Reveal Solution Discussion Select an answer first
6. 5application · easy

   A company is deploying ECS in a virtual environment. The hypervisor provides four virtual NICs to the ECS VM. The deployment requires three separate networks: management, storage, and client. To achieve network separation, what is the minimum number of virtual NICs that must be used?

   • ATwo, with one NIC for management and storage, and one for client.
   • BOne, with VLAN tagging for all networks.
   • CThree, one for each network.
   • DFour, with one NIC for each network and one spare.
   Reveal Solution Discussion Select an answer first