During ECS installation, the network validation step fails because the management network and the storage network are configured on the same VLAN. The installation guide requires them to be on separate VLANs. What should you do?

Disable the storage network and use the management network for storage traffic.

Proceed with the installation, as this is a warning, not an error.

Reconfigure the switch ports to assign the management and storage networks to different VLANs.

Change the IP addresses of the storage network to a different subnet without changing VLANs.

Before installing ECS, you run the prerequisite checker on all nodes. The checker reports that the 'libaio' library is missing on one node. The node has internet access. What should you do?

Re-run the prerequisite checker to see if the error is transient.

Skip this node and install ECS on the other nodes only.

Install the 'libaio' package using the node's package manager.

Copy the library from another node using SCP.

An ECS installation fails because the 'docker' service is not running on a node. The service is enabled but fails to start. The log shows: 'Failed to start docker.service: Unit docker.service not found.' What is the most likely cause?

The node's systemd is corrupted.

The Docker service is not enabled at boot.

The Docker package is not installed on the node.

While reviewing ECS installation logs, you see repeated entries of 'Failed to mount /dev/sdc1: No such file or directory'. What is the most likely root cause?

The installation package is corrupted

The device node does not exist, indicating a storage configuration error

Dell ECS Deploy

Domain 2Objective 5

Troubleshoot ECS Installation Issues ECS-DEPLOY Practice Questions (Page 1)

Part of the ECS Implementation domain, which accounts for 36% of the ECS-DEPLOY exam.

22questions here

5free pages

7concepts

36%of the exam

Questions 1–5

1application · medium
During ECS installation, the network validation step fails because the management network and the storage network are configured on the same VLAN. The installation guide requires them to be on separate VLANs. What should you do?
Select an answer first
2foundation · easy
Which command is commonly used to test network connectivity between ECS nodes during installation troubleshooting?
Select an answer first
3application · easy
Before installing ECS, you run the prerequisite checker on all nodes. The checker reports that the 'libaio' library is missing on one node. The node has internet access. What should you do?
Select an answer first
4application · medium
An ECS installation fails because the 'docker' service is not running on a node. The service is enabled but fails to start. The log shows: 'Failed to start docker.service: Unit docker.service not found.' What is the most likely cause?
Select an answer first
5foundation · easy
While reviewing ECS installation logs, you see repeated entries of 'Failed to mount /dev/sdc1: No such file or directory'. What is the most likely root cause?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to ECS-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “ECS-DEPLOY” is a trademark of its owner, used for identification only.