A network administrator has a Cisco Catalyst 9105 access point that is mounted on a high ceiling. The administrator needs the serial number for a firmware license, but the bottom label is not readable from the floor. The AP is powered on and reachable via the network. Which method should be used?

Check the switch port the AP is connected to

Check the AP's mounting bracket

Use a ladder to read the bottom label

Use 'show version' from the AP's CLI

A technician is decommissioning a Cisco Catalyst 3850 switch that is no longer powered on. The switch is in a storage room, and the technician needs to find the serial number for the asset disposal form. The switch is on a shelf with the front panel facing the technician. What is the most efficient way to find the serial number?

Check the power supply for a serial number

Check the back panel for a label

Read the label on the front panel

Power on the switch and run 'show version'

A field technician is standing in front of a rack-mounted Cisco 4331 ISR router. The front panel label is obscured by a cable management tray, and the technician needs the serial number to register the device for a support contract. The router is powered on and the technician has console access. Which action provides the serial number without disturbing the cabling?

Run the 'show mac address-table' command from the CLI

Run the 'show version' command from the CLI

Check the back panel for an etched serial number

Remove the cable tray and read the front panel label

A security technician is racking a Cisco Firepower 1010 appliance. The technician needs to record the serial number before final installation, but the device is still on the floor and the bottom label is facing down. The appliance is not powered on. What is the best way to get the serial number?

Power on the appliance and use 'show version'

Check the front panel for a label

Turn the appliance over to read the bottom label

CiscoCertified Field Technician (CCT)

Domain 2Objective 10

2.10 Locate Serial Numbers on Cisco Devices 800-150 Practice Questions (Page 2)

Part of the 2.0 Common Service Tasks and Tools domain, which accounts for 15% of the 800-150 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~8–12 in this domain), expect 1–1 from this objective — we provide 23 practice questions to prepare you well beyond it. (estimate)

23questions here

5free pages

7concepts

15%of the exam

Questions 6–10

6application · medium
A network administrator has a Cisco Catalyst 9105 access point that is mounted on a high ceiling. The administrator needs the serial number for a firmware license, but the bottom label is not readable from the floor. The AP is powered on and reachable via the network. Which method should be used?
Select an answer first
7foundation · easy
Which CLI command can be used to retrieve the serial number of a Cisco router?
Select an answer first
8application · easy
A technician is decommissioning a Cisco Catalyst 3850 switch that is no longer powered on. The switch is in a storage room, and the technician needs to find the serial number for the asset disposal form. The switch is on a shelf with the front panel facing the technician. What is the most efficient way to find the serial number?
Select an answer first
9application · medium
A field technician is standing in front of a rack-mounted Cisco 4331 ISR router. The front panel label is obscured by a cable management tray, and the technician needs the serial number to register the device for a support contract. The router is powered on and the technician has console access. Which action provides the serial number without disturbing the cabling?
Select an answer first
10application · easy
A security technician is racking a Cisco Firepower 1010 appliance. The technician needs to record the serial number before final installation, but the device is still on the floor and the bottom label is facing down. The appliance is not powered on. What is the best way to get the serial number?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 800-150

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “800-150” is a trademark of its owner, used for identification only.

2.10 Locate Serial Numbers on Cisco Devices 800-150 Practice Questions (Page 2)

Questions 6–10

A network administrator has a Cisco Catalyst 9105 access point that is mounted on a high ceiling. The administrator needs the serial number for a firmware license, but the bottom label is not readable from the floor. The AP is powered on and reachable via the network. Which method should be used?

Which CLI command can be used to retrieve the serial number of a Cisco router?

A security technician is racking a Cisco Firepower 1010 appliance. The technician needs to record the serial number before final installation, but the device is still on the floor and the bottom label is facing down. The appliance is not powered on. What is the best way to get the serial number?

Keep studying — 2.0 Common Service Tasks and Tools