A technician is using PuTTY to connect to a Cisco switch console. The technician has set the baud rate to 9600, data bits to 8, parity to none, stop bits to 1, and flow control to none. The session works. What would happen if the technician changed the baud rate to 4800?

The session would disconnect after a few seconds

The session would produce garbled output or no output

The session would work normally

The session would be slower but still work

A technician is looking at a Cisco switch and sees a port labeled 'CON' and a port labeled 'MGMT'. Which port should the technician use for initial console access?

Either port, as they are both for management

Neither port, as you need a different port

A technician has connected a laptop to a Cisco router's console port and opened Tera Term. After configuring the serial settings, the technician presses Enter but sees no prompt. What should the technician do first?

Check if the router is powered on

CiscoCertified Field Technician (CCT)

Domain 2Objective 6

2.6 Explain How to Connect to the Console Port 800-150 Practice Questions (Page 2)

Part of the 2.0 Common Service Tasks and Tools domain, which accounts for 15% of the 800-150 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~8–12 in this domain), expect 1–1 from this objective — we provide 18 practice questions to prepare you well beyond it. (estimate)

18questions here

4free pages

5concepts

15%of the exam

Questions 6–10

6application · medium
A technician is using PuTTY to connect to a Cisco switch console. The technician has set the baud rate to 9600, data bits to 8, parity to none, stop bits to 1, and flow control to none. The session works. What would happen if the technician changed the baud rate to 4800?
Select an answer first
7application · easy
A technician is looking at a Cisco switch and sees a port labeled 'CON' and a port labeled 'MGMT'. Which port should the technician use for initial console access?
Select an answer first
8application · easy
A technician has connected a laptop to a Cisco router's console port and opened Tera Term. After configuring the serial settings, the technician presses Enter but sees no prompt. What should the technician do first?
Select an answer first
9foundation · easy
Which software application is commonly used to establish a console session with a Cisco device?
Select an answer first
10foundation · easy
A technician needs to connect a laptop to a Cisco router for initial configuration. Which port on the router is used for this purpose?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 800-150

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “800-150” is a trademark of its owner, used for identification only.

2.6 Explain How to Connect to the Console Port 800-150 Practice Questions (Page 2)

Questions 6–10

A technician is using PuTTY to connect to a Cisco switch console. The technician has set the baud rate to 9600, data bits to 8, parity to none, stop bits to 1, and flow control to none. The session works. What would happen if the technician changed the baud rate to 4800?

A technician is looking at a Cisco switch and sees a port labeled 'CON' and a port labeled 'MGMT'. Which port should the technician use for initial console access?

A technician has connected a laptop to a Cisco router's console port and opened Tera Term. After configuring the serial settings, the technician presses Enter but sees no prompt. What should the technician do first?

Which software application is commonly used to establish a console session with a Cisco device?

A technician needs to connect a laptop to a Cisco router for initial configuration. Which port on the router is used for this purpose?

Keep studying — 2.0 Common Service Tasks and Tools