A technician has just configured a new SVI (Switch Virtual Interface) for VLAN 10 on a Nexus switch. They need to verify that the SVI is up and has the correct IP address. Which command should they use?

show running-config interface vlan 10

CiscoCertified Field Technician (CCT)

Domain 5Objective 3

5.3 Describe the Process for Configuring Cisco NX-OS Software 800-150 Practice Questions (Page 6)

Part of the 5.0 Cisco Hardware Replacement domain, which accounts for 35% of the 800-150 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~18–28 in this domain), expect 5–7 from this objective — we provide 27 practice questions to prepare you well beyond it. (estimate)

27questions here

6free pages

8concepts

35%of the exam

Questions 26–27

26foundation · easy
Which NX-OS command is used to verify the status of interfaces on a Nexus switch?
Select an answer first
27application · easy
A technician has just configured a new SVI (Switch Virtual Interface) for VLAN 10 on a Nexus switch. They need to verify that the SVI is up and has the correct IP address. Which command should they use?
Select an answer first

Finished these 2 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to 800-150

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “800-150” is a trademark of its owner, used for identification only.

5.3 Describe the Process for Configuring Cisco NX-OS Software 800-150 Practice Questions (Page 6)

Questions 26–27

Which NX-OS command is used to verify the status of interfaces on a Nexus switch?

A technician has just configured a new SVI (Switch Virtual Interface) for VLAN 10 on a Nexus switch. They need to verify that the SVI is up and has the correct IP address. Which command should they use?

Keep studying — 5.0 Cisco Hardware Replacement