A technician is troubleshooting a leaf switch in an ACI fabric that will not boot. The APIC controllers are reachable, but the leaf switch is stuck in a loop. What is the most likely cause and solution?

The leaf switch's VDC is misconfigured; reset the VDC

The leaf switch cannot reach the APIC controller to download its image; verify network connectivity and APIC availability

The leaf switch's configuration register is set to skip the startup config; reset it

The leaf switch has a corrupt local image; reinstall the image from USB

What does the question mark (?) feature do in NX-OS CLI?

It saves the configuration to the startup config

It deletes the current command line

It displays available commands or command arguments

What is the purpose of changing the configuration register during NX-OS password recovery?

To enable the switch to boot into maintenance mode

To reset the switch to factory defaults

To force the switch to boot from a different NX-OS image

To make the switch ignore the startup configuration during boot

What is the purpose of the default VDC in a Cisco Nexus switch running NX-OS?

It is a VDC created specifically for storage traffic

It is a VDC that cannot be used for any configuration

It is the initial VDC that exists by default and is used to manage the switch

It is a VDC used only for backup and recovery operations

CiscoCertified Field Technician (CCT)

Domain 5Objective 3

5.3 Describe the Process for Configuring Cisco NX-OS Software 800-150 Practice Questions (Page 2)

Part of the 5.0 Cisco Hardware Replacement domain, which accounts for 35% of the 800-150 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~18–28 in this domain), expect 5–7 from this objective — we provide 27 practice questions to prepare you well beyond it. (estimate)

27questions here

6free pages

8concepts

35%of the exam

Questions 6–10

6expert · hard
A technician is troubleshooting a leaf switch in an ACI fabric that will not boot. The APIC controllers are reachable, but the leaf switch is stuck in a loop. What is the most likely cause and solution?
Select an answer first
7foundation · easy
What does the question mark (?) feature do in NX-OS CLI?
Select an answer first
8foundation · easy
Which NX-OS command is used to create a VLAN on a Nexus switch?
Select an answer first
9foundation · easy
What is the purpose of changing the configuration register during NX-OS password recovery?
Select an answer first
10foundation · easy
What is the purpose of the default VDC in a Cisco Nexus switch running NX-OS?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 800-150

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “800-150” is a trademark of its owner, used for identification only.