1.1 Deploy FlexConnect Components Such as Switching and Operating Modes 300-430 Practice Questions (Page 6)

Questions 26–30

1. 26application · medium

   A FlexConnect AP is configured with local switching for a guest SSID. The guest VLAN is only present at the WLC, not at the branch. What is the impact on guest client traffic?

   • AGuest traffic will be tunneled to the WLC because the VLAN is not local.
   • BGuest clients will not be able to pass traffic because the VLAN is not available locally.
   • CGuest traffic will be sent to the WLC via a separate CAPWAP tunnel.
   • DGuest traffic will be bridged locally onto the branch network.
   Reveal Solution Discussion Select an answer first
2. 27expert · hard

   A hospital deploys FlexConnect APs in clinics. The clinics have a local server for electronic health records (EHR) that must be accessed with low latency. The WAN link to the central WLC is reliable but has limited bandwidth. The hospital also needs to enforce compliance policies on all traffic. Which switching mode should be used for the EHR WLAN?

   • ALocal switching, because it provides low latency to the local EHR server, but it bypasses central policy enforcement.
   • BLocal switching with a local policy enforcement point, such as a firewall at the clinic.
   • CCentral switching with a local EHR server that is also reachable via the WAN.
   • DCentral switching, because it allows policy enforcement, but it adds latency and WAN bandwidth usage.
   Reveal Solution Discussion Select an answer first
4. 28application · medium

   A retail chain deploys FlexConnect APs at each store. The WAN link to the central WLC is reliable, but the store manager wants guest traffic to be locally bridged to the store's internet circuit to reduce WAN load. Corporate SSIDs must continue to tunnel back to the WLC. Which configuration should you implement?

   • ASet the guest WLAN to local switching and the corporate WLAN to central switching, with the FlexConnect AP in connected mode.
   • BSet both WLANs to local switching so all traffic is bridged at the AP, including corporate traffic.
   • CSet both WLANs to central switching and rely on the WLC to route guest traffic to the store's internet circuit.
   • DConfigure the FlexConnect AP in standalone mode and enable local switching on the corporate WLAN only.
   Reveal Solution Discussion Select an answer first
5. 29application · medium

   A company is deploying FlexConnect at a remote site. The site has a local VLAN for voice traffic and a separate VLAN for data. The WLC is at headquarters. Which configuration is required on the FlexConnect AP to ensure voice clients are placed in the correct VLAN?

   • AConfigure the voice VLAN on the WLC and rely on the WLC to tag traffic centrally.
   • BUse the same VLAN for voice and data to simplify the deployment.
   • CMap the voice WLAN to the voice VLAN in the FlexConnect VLAN mapping configuration.
   • DEnable CDP on the AP to automatically discover the voice VLAN.
   Reveal Solution Discussion Select an answer first
6. 30application · medium

   A company wants to deploy FlexConnect APs at a remote site. The site has a local DHCP server for client addressing. The WLAN is configured for local switching. Where should the DHCP server be reachable from?

   • AThe WLC's management subnet, because the WLC will relay DHCP requests.
   • BThe AP's local subnet, because the AP will bridge DHCP requests to the local network.
   • CThe central site's network, because DHCP requests are tunneled to the WLC.
   • DThe AP's management VLAN, because the AP will use its own IP for DHCP relay.
   Reveal Solution Discussion Select an answer first