1.1 Deploy FlexConnect Components Such as Switching and Operating Modes 300-430 Practice Questions (Page 2)

Questions 6–10

1. 6foundation · easy

   When a FlexConnect AP is in connected mode, which statement is true?

   • AThe AP only forwards management traffic to the controller, while all client traffic is switched locally
   • BThe AP operates independently and does not communicate with the wireless LAN controller
   • CThe AP has an active CAPWAP tunnel to the wireless LAN controller and can receive configuration updates
   • DThe AP must use central switching for all client traffic
   Reveal Solution Discussion Select an answer first
2. 7application · medium

   A company is planning a FlexConnect deployment for 50 remote sites. Each site has a single access switch and a router. The WLC is centralized. The network team wants to minimize the number of CAPWAP tunnels and simplify management. What is the recommended approach?

   • ADeploy a WLC at each site to terminate CAPWAP tunnels locally.
   • BUse a single WLC and configure all APs in FlexConnect mode.
   • CUse autonomous APs and manage them individually.
   • DUse a mesh network and eliminate the need for CAPWAP tunnels.
   Reveal Solution Discussion Select an answer first
4. 8expert · hard

   A FlexConnect AP is configured with two SSIDs: SSID-A uses local switching and SSID-B uses central switching. The CAPWAP tunnel goes down. The network administrator wants to minimize the impact on users. What should be configured to ensure that SSID-B clients can still access the local LAN?

   • AConfigure SSID-B for local switching as well.
   • BAccept that SSID-B will be unavailable until the tunnel is restored.
   • CConfigure a backup WLC to take over when the primary is unreachable.
   • DConfigure SSID-B to use local authentication and local switching.
   Reveal Solution Discussion Select an answer first
5. 9foundation · easy

   In FlexConnect, what is the primary behavior of an AP operating in standalone mode?

   • AThe AP reboots and attempts to rejoin the controller every 30 seconds
   • BThe AP stops all client traffic until the CAPWAP tunnel is restored
   • CThe AP switches all client traffic to central switching to maintain connectivity
   • DThe AP continues to serve client traffic using locally configured settings after losing connectivity to the controller
   Reveal Solution Discussion Select an answer first
6. 10expert · medium

   A company deploys FlexConnect APs at a branch. The branch has a local DHCP server, but the WLAN is configured for central switching. The CAPWAP tunnel to the WLC is up. What is the DHCP behavior for clients?

   • ADHCP requests are bridged locally by the AP to the local DHCP server.
   • BDHCP requests are answered by the AP itself using a local DHCP pool.
   • CDHCP requests are dropped because central switching does not support DHCP.
   • DDHCP requests are tunneled to the WLC, which relays them to the DHCP server configured on the WLC.
   Reveal Solution Discussion Select an answer first