3.1 Interpret the Components of Routing Table 200-301 Practice Questions (Page 6)

Questions 26–29

1. 26expert · medium

   A router has two OSPF routes to 10.10.10.0/24. Route A has a cost of 100 and is learned from a neighbor at 192.168.1.1. Route B has a cost of 100 and is learned from a neighbor at 192.168.2.1. What will the router do?

   • AInstall only the route with the lower next-hop IP
   • BInstall neither route because of a tie
   • CInstall only the route learned first
   • DInstall both routes and load balance traffic across them
   Reveal Solution Discussion Select an answer first
2. 27application · medium

   A router has a route to 10.0.0.0/8 learned via RIP with an administrative distance of 120, and another route to 10.0.0.0/8 learned via OSPF with an administrative distance of 110. Which route will be installed in the routing table?

   • AThe route with the lower metric
   • BBoth routes will be installed for load balancing
   • CThe OSPF route, because it has a lower administrative distance
   • DThe RIP route, because it has a lower administrative distance
   Reveal Solution Discussion Select an answer first
4. 28application · medium

   A network engineer is examining the routing table of a router and sees the following entry: 'O 10.50.0.0/16 [110/50] via 192.168.10.1, 00:10:00, GigabitEthernet0/0'. The router needs to forward a packet to 10.50.1.1. What is the next hop for this packet?

   • A10.50.1.1
   • B192.168.10.1
   • C10.50.0.1
   • DGigabitEthernet0/0
   Reveal Solution Discussion Select an answer first
5. 29expert · hard

   A router has the following routing table entries: 'S* 0.0.0.0/0 [1/0] via 203.0.113.1', 'O 10.0.0.0/8 [110/20] via 192.168.1.1', and 'C 10.1.0.0/16 is directly connected, GigabitEthernet0/0'. A packet destined for 10.1.2.3 arrives. Which route will be used?

   • AThe connected route 10.1.0.0/16, because it is the most specific match.
   • BThe OSPF route, because it has a lower metric than the connected route.
   • CThe OSPF route 10.0.0.0/8, because it has a lower administrative distance than the default route.
   • DThe default route, because it matches all destinations.
   Reveal Solution Discussion Select an answer first