A network administrator is on a Cisco router and needs to securely connect to a remote switch. The switch has SSH enabled with username 'admin' and password 'secret'. The administrator wants to specify the username and also set a source interface for the SSH connection. Which command should be used?

ssh -l admin -s gigabitethernet 0/0 192.168.1.20

ssh -u admin -s gigabitethernet 0/0 192.168.1.20

ssh -l admin 192.168.1.20 source gigabitethernet 0/0

ssh -l admin -i gigabitethernet 0/0 192.168.1.20

A network engineer is configuring a new Cisco IOS switch to support secure remote administration. The switch currently has the default hostname and no domain name configured. The engineer wants to enable SSH version 2 with local authentication. Which set of commands must be executed first to make SSH operational?

ip ssh version 2, username admin secret cisco, line vty 0 4, transport input ssh

crypto key generate rsa, ip domain-name example.com, hostname SW1, ip ssh version 2

hostname SW1, ip domain-name example.com, crypto key generate rsa, ip ssh version 2

username admin secret cisco, line vty 0 4, transport input ssh, ip ssh version 2

Which command is used to configure SSH version 2 on a Cisco IOS device?

crypto key generate rsa version 2

What is the primary purpose of SSH when used for remote device management?

To establish a VPN tunnel between two remote sites

To transfer files between network devices using a secure protocol

To provide encrypted communication between a management client and a network device

To provide a graphical interface for configuring network devices

CiscoCertified Network Associate (CCNA)

Domain 4Objective 8

4.8 Configure Network Devices for Remote Access Using SSH 200-301 Practice Questions (Page 3)

Part of the IP Services domain, which accounts for 10% of the 200-301 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~5–8 in this domain), expect 1–1 from this objective — we provide 24 practice questions to prepare you well beyond it. (estimate)

24questions here

5free pages

5concepts

10%of the exam

Questions 11–15

11foundation · easy
Which command is used on a Cisco IOS device to initiate an SSH connection to a remote device?
Select an answer first
12expert · hard
A network administrator is on a Cisco router and needs to securely connect to a remote switch. The switch has SSH enabled with username 'admin' and password 'secret'. The administrator wants to specify the username and also set a source interface for the SSH connection. Which command should be used?
Select an answer first
13application · medium
A network engineer is configuring a new Cisco IOS switch to support secure remote administration. The switch currently has the default hostname and no domain name configured. The engineer wants to enable SSH version 2 with local authentication. Which set of commands must be executed first to make SSH operational?
Select an answer first
14foundation · easy
Which command is used to configure SSH version 2 on a Cisco IOS device?
Select an answer first
15foundation · easy
What is the primary purpose of SSH when used for remote device management?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 200-301

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “200-301” is a trademark of its owner, used for identification only.

4.8 Configure Network Devices for Remote Access Using SSH 200-301 Practice Questions (Page 3)

Questions 11–15

Which command is used on a Cisco IOS device to initiate an SSH connection to a remote device?

Which command is used to configure SSH version 2 on a Cisco IOS device?

What is the primary purpose of SSH when used for remote device management?

Keep studying — IP Services