4.5 Describe the Use of Syslog Features, Including Facilities and Severity Levels 200-301 Practice Questions (Page 1)

Questions 1–5

1. 1application · medium

   A network engineer is examining a syslog message from a Cisco switch: 'Mar 1 10:15:30.123: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down'. What does the '3' in this message indicate?

   • AThe facility that generated the message
   • BThe version of the syslog protocol
   • CThe sequence number of the message
   • DThe severity level of the message
   Reveal Solution Discussion Select an answer first
2. 2application · medium

   A network engineer is analyzing a syslog message from a Cisco router: '%LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up'. What does the '3' in '%LINK-3-UPDOWN' indicate?

   • AThe version of the syslog protocol.
   • BThe facility code for the link process.
   • CThe sequence number of the message.
   • DThe severity level, which is 'errors'.
   Reveal Solution Discussion Select an answer first
4. 3application · medium

   A network engineer is analyzing a syslog message received from a Cisco router: 'Mar 1 12:34:56.789: %SYS-5-CONFIG_I: Configured from console by admin on vty0'. Which part of this message indicates the facility that generated the message?

   • AMar 1 12:34:56.789
   • B5
   • CCONFIG_I
   • D%SYS
   Reveal Solution Discussion Select an answer first
5. 4foundation · easy

   What is the meaning of syslog severity level 6 (Informational)?

   • ADebugging messages are generated to help troubleshoot issues
   • BNormal but significant events, such as interface up/down, are reported
   • CThe system is unusable and requires immediate attention
   • DA critical condition has occurred that requires immediate correction
   Reveal Solution Discussion Select an answer first
6. 5application · medium

   A network engineer is configuring a Cisco router to send syslog messages to a central server. The engineer wants to separate messages from different sources, such as OSPF and the local system, so they can be filtered on the server. What should the engineer do?

   • AConfigure different logging hosts for each facility.
   • BRely on the facility codes that are automatically assigned by the device.
   • CUse the 'logging facility' command to assign different facility codes to different processes.
   • DEnable SNMP traps for OSPF and syslog for the local system.
   Reveal Solution Discussion Select an answer first