4.5 Describe the Use of Syslog Features, Including Facilities and Severity Levels 200-301 Practice Questions (Page 3)

Questions 11–15

1. 11application · medium

   A network operations team is deciding how to monitor their network devices. They need to receive immediate notifications when a device interface goes down, and they also want to collect historical logs for troubleshooting. Which approach best combines syslog and SNMP?

   • AUse only SNMP traps for both alerts and logging.
   • BUse only syslog for both alerts and logging.
   • CUse SNMP traps for real-time alerts and syslog for detailed logging.
   • DUse syslog for real-time alerts and SNMP for detailed logging.
   Reveal Solution Discussion Select an answer first
2. 12foundation · easy

   Which command configures a Cisco IOS device to send syslog messages to a remote server at IP address 192.168.1.10?

   • Asnmp-server host 192.168.1.10
   • Bsyslog server 192.168.1.10
   • Clogging trap 192.168.1.10
   • Dlogging host 192.168.1.10
   Reveal Solution Discussion Select an answer first
4. 13expert · medium

   A network engineer is analyzing syslog messages from multiple Cisco devices. The engineer notices that some messages have a timestamp that is incorrect, and the engineer suspects that the devices' clocks are not synchronized. The engineer wants to ensure that syslog messages are timestamped correctly. Which action should the engineer take?

   • AConfigure the logging source-interface to a loopback interface
   • BSet the logging trap level to debugging to capture more messages
   • CEnable the logging timestamp command on all devices
   • DConfigure NTP on all devices to synchronize their clocks
   Reveal Solution Discussion Select an answer first
5. 14foundation · easy

   Which statement best describes the basic operation of syslog on a Cisco network device?

   • AThe device runs a syslog daemon that receives messages from other devices and displays them on the console
   • BThe device polls a central syslog server periodically to check for new configuration updates
   • CThe device stores all syslog messages only in its local RAM and never sends them to external servers
   • DThe device generates event messages and sends them to a configured syslog server using UDP port 514 by default
   Reveal Solution Discussion Select an answer first
6. 15foundation · easy

   What is the primary purpose of syslog on a network device such as a Cisco router or switch?

   • ATo collect and forward event messages generated by the device to a central logging server for monitoring and troubleshooting
   • BTo provide real-time packet capture and analysis for troubleshooting network performance issues
   • CTo synchronize the device's clock with an external time source for accurate timestamping of logs
   • DTo authenticate users and control access to the device's management interfaces
   Reveal Solution Discussion Select an answer first