During ZTP, how can a Juniper device be instructed to install a specific software image before applying the configuration?

By using a special configuration file that contains the 'request system software add' command

By setting the device's boot parameters to load the image from a local USB drive

By manually uploading the image to the device via the console port before ZTP begins

By including the image file name in the DHCP options and placing the image on the provisioning server

Which security measure is important when deploying ZTP in a data center?

Allowing any device to initiate ZTP without authentication to simplify deployment

Disabling all network access to the provisioning server to protect it from attacks

Using plaintext protocols like TFTP to simplify troubleshooting

Using DHCP snooping to prevent rogue DHCP servers from providing malicious ZTP information

Juniper NetworksCertified Professional, Data Center (JNCIP-DC)

Domain 1Objective 1

Zero-Touch Provisioning (ZTP) JN0-683 Practice Questions (Page 4)

Part of the Data Center Deployment and Management domain, which makes up ~11% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–7 in this domain), expect 1–2 from this objective — we provide 17 practice questions to prepare you well beyond it. (estimate)

17questions here

4free pages

8concepts

Questions 16–17

16foundation · easy
During ZTP, how can a Juniper device be instructed to install a specific software image before applying the configuration?
Select an answer first
17foundation · easy
Which security measure is important when deploying ZTP in a data center?
Select an answer first

Finished these 2 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to JN0-683

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-683” is a trademark of its owner, used for identification only.

Zero-Touch Provisioning (ZTP) JN0-683 Practice Questions (Page 4)

Questions 16–17

During ZTP, how can a Juniper device be instructed to install a specific software image before applying the configuration?

Which security measure is important when deploying ZTP in a data center?

Keep studying — Data Center Deployment and Management