You are configuring a Junos device as a DHCP server. You need to define a range of addresses that will be excluded from dynamic assignment, for example, for network equipment that uses static IPs. What is the correct way to exclude a specific address from a pool?

Use a firewall filter to block DHCPOFFER messages for the specific addresses.

Create a separate pool for the excluded addresses and mark it as 'static-only'.

Set the 'max-lease-time' to 0 for the addresses you want to exclude.

Use the 'exclude' statement within the pool configuration to specify the address or range.

Which Junos command is used to enable detailed logging for DHCP troubleshooting?

set protocols dhcp traceoptions file dhcp-log

set forwarding-options dhcp-relay traceoptions file dhcp-log

set system syslog file dhcp-log

set system services dhcp traceoptions file dhcp-log

A data center provides DHCP services to multiple tenants. One tenant requires a specific NTP server address (192.0.2.123) to be delivered to their clients. You need to configure this on the Junos DHCP server. What is the correct configuration?

Set 'time-server 192.0.2.123' within the tenant's pool.

Set 'ntp-server 192.0.2.123' within the tenant's pool.

Set 'option 4 192.0.2.123' within the tenant's pool.

Set 'option 42 192.0.2.123' within the tenant's pool.

Juniper NetworksCertified Professional, Data Center (JNCIP-DC)

Domain 1Objective 2

Dynamic Host Configuration Protocol (DHCP) JN0-683 Practice Questions (Page 5)

Part of the Data Center Deployment and Management domain, which makes up ~11% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–7 in this domain), expect 1–2 from this objective — we provide 24 practice questions to prepare you well beyond it. (estimate)

24questions here

5free pages

6concepts

Questions 21–24

21foundation · easy
Which DHCP option is used to specify the DNS servers that a client should use?
Select an answer first
22application · medium
You are configuring a Junos device as a DHCP server. You need to define a range of addresses that will be excluded from dynamic assignment, for example, for network equipment that uses static IPs. What is the correct way to exclude a specific address from a pool?
Select an answer first
23foundation · easy
Which Junos command is used to enable detailed logging for DHCP troubleshooting?
Select an answer first
24application · medium
A data center provides DHCP services to multiple tenants. One tenant requires a specific NTP server address (192.0.2.123) to be delivered to their clients. You need to configure this on the Junos DHCP server. What is the correct configuration?
Select an answer first

Finished these 4 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to JN0-683

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-683” is a trademark of its owner, used for identification only.

Dynamic Host Configuration Protocol (DHCP) JN0-683 Practice Questions (Page 5)

Questions 21–24

Which DHCP option is used to specify the DNS servers that a client should use?

You are configuring a Junos device as a DHCP server. You need to define a range of addresses that will be excluded from dynamic assignment, for example, for network equipment that uses static IPs. What is the correct way to exclude a specific address from a pool?

Which Junos command is used to enable detailed logging for DHCP troubleshooting?

A data center provides DHCP services to multiple tenants. One tenant requires a specific NTP server address (192.0.2.123) to be delivered to their clients. You need to configure this on the Junos DHCP server. What is the correct configuration?

Keep studying — Data Center Deployment and Management