Juniper NetworksCertified Professional, Data Center (JNCIP-DC)
Domain 1Objective 2
Dynamic Host Configuration Protocol (DHCP) JN0-683 Practice Questions (Page 2)
Part of the Data Center Deployment and Management domain, which makes up ~11% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–7 in this domain), expect 1–2 from this objective — we provide 24 practice questions to prepare you well beyond it. (estimate)
24questions here
5free pages
6concepts
Questions 6–10
- 6
Which DHCP message is sent by a client to locate available DHCP servers on the network?
Select an answer first - 7
Which command is used to configure a DHCP client on a Junos interface?
Select an answer first - 8
Which configuration statement enables DHCP relay on a Junos device?
Select an answer first - 9
What is the purpose of DHCP option 82?
Select an answer first - 10
Clients on a subnet behind a Junos switch configured as a DHCP relay are failing to obtain IP addresses. The DHCP server is on a different subnet and is reachable via ping from the switch. You check the relay configuration and see 'set forwarding-options dhcp-relay server-group SERVER 10.0.0.10' and 'set forwarding-options dhcp-relay active-server-group SERVER'. The interface facing the clients is ge-0/0/1.0. What is the most likely missing configuration element?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-683” is a trademark of its owner, used for identification only.