A network engineer is tuning OSPF on a broadcast segment with multiple routers. The engineer wants to reduce the time it takes to detect a failed neighbor. Which configuration change would achieve this?

Increase the hello interval on the OSPF interface.

Increase the poll interval on the OSPF interface.

Decrease the dead interval on the OSPF interface.

Decrease the retransmit interval on the OSPF interface.

You are configuring OSPF on a router that connects area 0 and area 1. What is this router called?

Autonomous System Boundary Router (ASBR)

An engineer is configuring OSPF authentication on a link between two Junos routers. The engineer has configured 'authentication-type md5' and 'authentication-key' on one router. The adjacency is not forming. What is the most likely cause?

The OSPF area ID is different on the two routers.

The other router has not been configured with the same authentication type and key.

The hello interval is different on the two routers.

The interface is configured as passive on one router.

Juniper NetworksCertified Professional, Service Provider Routing and Switching (JNCIP-SP)

Domain 1Objective 8

Configure or Monitor Single-Area or Multi-Area OSPF with Routing Policy JN0-664 Practice Questions (Page 1)

Part of the OSPF domain, which makes up ~19% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~7–11 in this domain), expect 1–1 from this objective — we provide 20 practice questions to prepare you well beyond it. (estimate)

20questions here

4free pages

10concepts

Questions 1–5

1foundation · easy
Which operational command displays the current state of OSPF neighbors on a Junos device?
Select an answer first
2application · medium
A network engineer is tuning OSPF on a broadcast segment with multiple routers. The engineer wants to reduce the time it takes to detect a failed neighbor. Which configuration change would achieve this?
Select an answer first
3foundation · easy
Which OSPF route type is typically controlled by an export policy when redistributing external routes into OSPF?
Select an answer first
4foundation · easy
You are configuring OSPF on a router that connects area 0 and area 1. What is this router called?
Select an answer first
5application · medium
An engineer is configuring OSPF authentication on a link between two Junos routers. The engineer has configured 'authentication-type md5' and 'authentication-key' on one router. The adjacency is not forming. What is the most likely cause?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-664

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-664” is a trademark of its owner, used for identification only.

Configure or Monitor Single-Area or Multi-Area OSPF with Routing Policy JN0-664 Practice Questions (Page 1)

Questions 1–5

Which operational command displays the current state of OSPF neighbors on a Junos device?

A network engineer is tuning OSPF on a broadcast segment with multiple routers. The engineer wants to reduce the time it takes to detect a failed neighbor. Which configuration change would achieve this?

Which OSPF route type is typically controlled by an export policy when redistributing external routes into OSPF?

You are configuring OSPF on a router that connects area 0 and area 1. What is this router called?

An engineer is configuring OSPF authentication on a link between two Junos routers. The engineer has configured 'authentication-type md5' and 'authentication-key' on one router. The adjacency is not forming. What is the most likely cause?

Keep studying — OSPF