
Juniper NetworksCertified Professional, Service Provider Routing and Switching (JNCIP-SP)
Domain 1Objective 1
OSPFv2 and OSPFv3 Concepts and Operation JN0-664 Practice Questions (Page 1)
Part of the OSPF domain, which makes up ~19% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~7–11 in this domain), expect 1–1 from this objective — we provide 29 practice questions to prepare you well beyond it. (estimate)
29questions here
6free pages
10concepts
Questions 1–5
- 1
A service provider is running a dual-stack network with OSPFv2 and OSPFv3. The security team mandates that all routing protocol traffic be authenticated. The engineer has configured MD5 authentication for OSPFv2 and IPsec for OSPFv3. During a review, the engineer discovers that OSPFv3 adjacencies are forming but OSPFv2 adjacencies are not. Which is the most likely cause?
Select an answer first - 2
A network administrator is configuring OSPFv3 on a Junos router and needs to secure the routing updates between two directly connected routers. The administrator wants to use IPsec for authentication. Which configuration step is required on the Junos device?
Select an answer first - 3
Which Junos configuration statement is used to assign an interface to an OSPFv3 area?
Select an answer first - 4
A network engineer is configuring OSPFv3 on a Junos router and needs to ensure that OSPFv3 packets are authenticated. The engineer has decided to use IPsec. Which statement is correct regarding IPsec for OSPFv3 on Junos?
Select an answer first - 5
An OSPFv3 router receives two routes to the same IPv6 prefix. One route is an Inter-Area-Prefix LSA from an ABR, and the other is an AS-External LSA from an ASBR. The router must select the best path. Which route will be preferred?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-664” is a trademark of its owner, used for identification only.