Juniper NetworksCertified Professional, Enterprise Routing and Switching (JNCIP-ENT)
Domain 3Objective 3
Multicast Configuration and Operations JN0-650 Practice Questions (Page 2)
Part of the IP Multicast domain, which makes up ~8% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~3–5 in this domain), expect 1–2 from this objective — we provide 21 practice questions to prepare you well beyond it. (estimate)
21questions here
5free pages
6concepts
Questions 6–10
- 6
Which PIM mode uses a rendezvous point (RP) to establish the shared tree for multicast groups?
Select an answer first - 7
A multicast receiver is not receiving traffic for group 239.3.3.3. The administrator runs 'show pim join' and sees an entry for the group with the RP, but the outgoing interface list is empty. What does this indicate?
Select an answer first - 8
Which Junos operational command displays IGMP group membership information, including the interface and group address?
Select an answer first - 9
A network administrator is troubleshooting a multicast issue where a host is intermittently not receiving traffic for a group. The router's IGMP query interval is set to 125 seconds, and the robustness variable is 2. The administrator suspects that IGMP reports are being lost. Which configuration change would most effectively improve reliability without significantly increasing control traffic?
Select an answer first - 10
Which routing policy match condition is used to match multicast routes based on the group address in a Junos routing policy?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-650” is a trademark of its owner, used for identification only.