Juniper NetworksCertified Professional, Enterprise Routing and Switching (JNCIP-ENT)
Domain 3Objective 3
Multicast Configuration and Operations JN0-650 Practice Questions (Page 1)
Part of the IP Multicast domain, which makes up ~8% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~3–5 in this domain), expect 1–2 from this objective — we provide 21 practice questions to prepare you well beyond it. (estimate)
21questions here
5free pages
6concepts
Questions 1–5
- 1
Which multicast scoping method is configured by defining a prefix list and applying it to an interface to prevent multicast traffic from crossing that boundary?
Select an answer first - 2
Which Junos operational command displays the PIM neighbor adjacencies?
Select an answer first - 3
Which IGMP statistic would you examine to determine if the router is receiving membership reports from hosts?
Select an answer first - 4
A network engineer is configuring PIM-SM in a network with a small number of routers. The engineer wants to use a static RP to avoid the overhead of a bootstrap mechanism. The RP address is 10.0.0.1. Which configuration is required on the non-RP routers to enable PIM-SM with this static RP?
Select an answer first - 5
A network administrator notices that hosts on a segment are taking several minutes to start receiving multicast video after joining a group. The IGMP query interval on the router interface is currently set to 125 seconds. The administrator wants to reduce the join latency without significantly increasing control traffic. Which IGMP setting should be adjusted?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-650” is a trademark of its owner, used for identification only.