A network operator is investigating intermittent packet loss on a link between two leaf devices. The topology view shows the link as green, and the Telemetry tab shows no errors. The operator suspects the issue may be related to microbursts. Which additional data source in the Blueprint UI would help confirm this?

Use the Topology view's filter to show links with high utilization

Review the Staged configuration for the link to check for QoS settings

Review the interface's historical queue depth and buffer utilization graphs in the Telemetry tab

Check the link's operational state in the Properties panel for any warnings

A network engineer is reviewing a blueprint in the Apstra UI and notices that a leaf-spine link is rendered in red while all other links are green. The engineer wants to determine whether this is a physical cabling issue or a configuration mismatch. Which action in the Blueprint UI provides the most direct diagnostic information?

Select the red link in the topology view and review the link's operational state and error counters

Run a trace from the leaf device to the spine device using the Tools menu in the Blueprint UI

Open the Telemetry page and graph interface traffic on the leaf-spine link over the last 24 hours

Navigate to the Staged tab and compare the intended leaf-spine configuration with the device's running config

A network operator needs to generate a report on the historical bandwidth utilization of a specific interface over the past week. The operator wants to export this data for further analysis. Which feature in the Blueprint UI supports this?

The Topology view, which shows link status

The Telemetry tab for the interface, which provides historical graphs and an export option

The Staged tab, which shows the interface configuration

The Properties panel for the device, which shows operational state

A network engineer is troubleshooting a BGP session that is flapping between a leaf and a spine device. The topology view shows the link as green, and the Telemetry tab shows no interface errors. The engineer suspects the issue may be related to a routing policy or a BGP timer mismatch. Which sequence of actions in the Blueprint UI would most efficiently isolate the root cause?

Export the operational state of both devices and compare their routing tables

Use the Topology view to trace the path and check for any link issues

Check the Uncommitted tab to see if there are any pending changes that might affect BGP

Review the BGP session state in the Telemetry tab, then compare the BGP configuration on both devices in the Staged tab

Which of the following actions can be performed directly from the Blueprint UI's main view?

Access the blueprint's topology, telemetry, and configuration views

Juniper NetworksCertified Specialist, Data Center (JNCIS-DC)

Domain 4Objective 2

Blueprint UI JN0-481 Practice Questions (Page 2)

Part of the Apstra Build and Deploy Phases domain, which makes up ~14% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–8 in this domain), expect 1–2 from this objective — we provide 26 practice questions to prepare you well beyond it. (estimate)

26questions here

6free pages

5concepts

Questions 6–10

6expert · hard
A network operator is investigating intermittent packet loss on a link between two leaf devices. The topology view shows the link as green, and the Telemetry tab shows no errors. The operator suspects the issue may be related to microbursts. Which additional data source in the Blueprint UI would help confirm this?
Select an answer first
7application · medium
A network engineer is reviewing a blueprint in the Apstra UI and notices that a leaf-spine link is rendered in red while all other links are green. The engineer wants to determine whether this is a physical cabling issue or a configuration mismatch. Which action in the Blueprint UI provides the most direct diagnostic information?
Select an answer first
8application · medium
A network operator needs to generate a report on the historical bandwidth utilization of a specific interface over the past week. The operator wants to export this data for further analysis. Which feature in the Blueprint UI supports this?
Select an answer first
9expert · hard
A network engineer is troubleshooting a BGP session that is flapping between a leaf and a spine device. The topology view shows the link as green, and the Telemetry tab shows no interface errors. The engineer suspects the issue may be related to a routing policy or a BGP timer mismatch. Which sequence of actions in the Blueprint UI would most efficiently isolate the root cause?
Select an answer first
10foundation · easy
Which of the following actions can be performed directly from the Blueprint UI's main view?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-481

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-481” is a trademark of its owner, used for identification only.

Blueprint UI JN0-481 Practice Questions (Page 2)

Questions 6–10

A network operator needs to generate a report on the historical bandwidth utilization of a specific interface over the past week. The operator wants to export this data for further analysis. Which feature in the Blueprint UI supports this?

Which of the following actions can be performed directly from the Blueprint UI's main view?

Keep studying — Apstra Build and Deploy Phases