A network engineer is configuring a new building's network. The engineer needs to define the VLANs for the building, set the access port profiles for the office devices, and configure the guest WLAN policy. Which template types should the engineer use for each of these tasks?

A single switch template that includes VLANs, port profiles, and guest WLAN policy.

Port template for VLANs, switch template for access port profiles, and network template for guest WLAN policy.

Switch template for VLANs, port template for access port profiles, and network template for guest WLAN policy.

Network template for VLANs, switch template for access port profiles, and port template for guest WLAN policy.

Which of the following is an example of using a variable in a template?

Using {{hostname}} to set each switch's hostname

Defining a VLAN ID as 100 for all switches

Applying the same port profile to all access ports

Setting the same SNMP community for all switches

A switch is assigned to a group template that sets VLAN 10 on port ge-0/0/1. The same switch is also assigned a device-specific template that sets VLAN 20 on the same port. What will be the final configuration on that port?

VLAN 20, because the device-specific template takes precedence over the group template.

Both VLAN 10 and VLAN 20 will be configured, with VLAN 10 as the primary.

The configuration will fail because of the conflict between the two templates.

VLAN 10, because the group template was assigned first.

Why is it important to validate a template before deploying it in Mist Wired Assurance?

To check if the template is aesthetically pleasing

To confirm that the template is backed up

To ensure the template syntax is correct and compatible with target devices

To verify that the template will not increase network traffic

How can you verify that a template was successfully applied to a switch?

By comparing the template checksum with the switch's running config

By rebooting the switch and checking if it comes back up

By checking the switch's configuration status in the Mist dashboard

By pinging the switch from the Mist cloud

Juniper NetworksCertified Specialist, Mist AI Wired (JNCIS-MistAI)

Domain 2Objective 5

Templates JN0-460 Practice Questions (Page 4)

Part of the Wired Assurance Provisioning or Deployment domain, which makes up ~27% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~9–16 in this domain), expect 1–2 from this objective — we provide 38 practice questions to prepare you well beyond it. (estimate)

38questions here

8free pages

12concepts

Questions 16–20

16application · medium
A network engineer is configuring a new building's network. The engineer needs to define the VLANs for the building, set the access port profiles for the office devices, and configure the guest WLAN policy. Which template types should the engineer use for each of these tasks?
Select an answer first
17foundation · easy
Which of the following is an example of using a variable in a template?
Select an answer first
18application · medium
A switch is assigned to a group template that sets VLAN 10 on port ge-0/0/1. The same switch is also assigned a device-specific template that sets VLAN 20 on the same port. What will be the final configuration on that port?
Select an answer first
19foundation · easy
Why is it important to validate a template before deploying it in Mist Wired Assurance?
Select an answer first
20foundation · easy
How can you verify that a template was successfully applied to a switch?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-460

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-460” is a trademark of its owner, used for identification only.