Site Variables JN0-460 Practice Questions (Page 1)

Questions 1–5

1. 1foundation · easy

   Which site variable type in Mist Wired Assurance is best suited for storing the VLAN ID that is used across all switches in a particular building?

   • ANetwork-specific variable
   • BGlobal variable
   • CLocation-specific variable
   • DDevice-specific variable
   Reveal Solution Discussion Select an answer first
2. 2expert · hard

   A template is assigned to a site. The template references '{{syslog_server}}'. The site variable is defined with the value '192.168.1.100'. After provisioning, the switch has the correct syslog configuration. The administrator then updates the site variable to '192.168.1.200'. What must the administrator do to apply the new value to the switch?

   • AReboot the switch to force it to re-read the variable.
   • BDelete the variable and recreate it with the new value.
   • CNothing; the switch will automatically update within a few minutes.
   • DRe-provision the switch or push the configuration again.
   Reveal Solution Discussion Select an answer first
4. 3expert · hard

   A template is assigned to a site with 10 switches. The template references '{{dns_server}}'. The site variable is defined with the value '8.8.8.8'. After provisioning, 9 switches have the correct DNS configuration, but one switch has the literal '{{dns_server}}' in its configuration. What is the most likely cause?

   • AThe one switch has a device-level variable 'dns_server' with a value that contains a special character.
   • BThe one switch was provisioned before the variable was defined.
   • CThe one switch has a device-level variable 'dns_server' with an empty value.
   • DThe one switch is assigned a different template that uses a different variable name.
   Reveal Solution Discussion Select an answer first
5. 4foundation · easy

   Which of the following correctly lists the precedence order for site variables in Mist Wired Assurance, from highest to lowest?

   • ATemplate > Site > Device
   • BSite > Device > Template
   • CDevice > Template > Site
   • DDevice > Site > Template
   Reveal Solution Discussion Select an answer first
6. 5application · medium

   A switch was provisioned with a template that uses the variable '{{access_vlan}}'. The switch is online, but the access ports are assigned to VLAN 1 instead of the intended VLAN. The site variable 'access_vlan' is defined with the value 50. What should the administrator check first?

   • AWhether the variable is defined at the device level with a different value.
   • BWhether the switch model supports VLAN 50.
   • CWhether the template was applied to the correct site.
   • DWhether the switch has been rebooted since the template was applied.
   Reveal Solution Discussion Select an answer first