Templates JN0-460 Practice Questions (Page 3)

Questions 11–15

1. 11application · medium

   A network engineer is setting up Mist Wired Assurance for a campus with multiple buildings. They need to define the VLANs that will be used across all switches, configure the access port settings for end-user devices, and define the network-level policies for guest access. Which combination of template types should the engineer use?

   • AA port template for VLANs, a network template for access ports, and a switch template for guest policies.
   • BA single switch template that includes VLANs, port profiles, and network policies.
   • COnly a network template, since it can contain all switch, port, and network settings.
   • DA switch template for VLANs, a port template for access port settings, and a network template for guest policies.
   Reveal Solution Discussion Select an answer first
2. 12foundation · easy

   What is the primary purpose of using templates in Mist Wired Assurance?

   • ATo replace the need for any device-specific configuration
   • BTo standardize configuration across multiple devices and reduce manual effort
   • CTo provide a backup of device configurations for disaster recovery
   • DTo automatically generate firmware updates for all managed switches
   Reveal Solution Discussion Select an answer first
4. 13application · medium

   A retail chain is deploying 40 identical EX2300 switches across 40 new store locations. Each switch will have the same VLANs, port profiles, and network policies. The network team wants to ensure every switch is configured identically and that future changes can be rolled out consistently. What is the most efficient approach in Mist Wired Assurance?

   • AConfigure each switch manually using the CLI, then save the configuration as a backup file for each device.
   • BCreate a switch template with the common settings, assign it to all 40 switches, and later modify the template to push changes to all devices.
   • CUse the Mist API to push a raw JSON configuration directly to each switch, bypassing the template system.
   • DCreate a network template and assign it to the switches, then create a separate port template for each switch's unique port layout.
   Reveal Solution Discussion Select an answer first
5. 14application · medium

   After assigning a new switch template to a group of 20 switches, the network team notices that 3 switches show a 'config push failed' status in the Mist dashboard. What should the team do first to troubleshoot the issue?

   • AReassign the template to the failed switches to force a new push attempt.
   • BReboot the 3 failed switches to clear any temporary issues.
   • CCheck the Mist audit logs and the configuration push details for the failed switches to identify the specific error.
   • DDelete the template and recreate it, then reassign to all switches.
   Reveal Solution Discussion Select an answer first
6. 15expert · hard

   A switch is assigned to a group template that defines a port profile with a variable {{access_vlan}} set to 100. The same switch is also assigned a device-specific template that defines the same port profile but with the variable {{access_vlan}} set to 200. What will be the final VLAN on the port?

   • AVLAN 100, because the group template's variable value is used as the default.
   • BBoth VLANs will be configured, with VLAN 100 as the access VLAN and VLAN 200 as a secondary VLAN.
   • CThe configuration will fail because the same variable is defined in two templates.
   • DVLAN 200, because the device-specific template's variable value takes precedence over the group template's value.
   Reveal Solution Discussion Select an answer first