An administrator is creating a configuration template for a new switch deployment. The template needs to include port profiles for access ports and uplink ports. What is the correct way to include port profiles in the template?

Use the CLI to configure port profiles on the switch

Create the port profiles separately and reference them in the template

Apply the port profiles directly to the switch after the template is applied

Define the port profiles within the template and assign them to the appropriate ports

A network engineer is deploying 50 new EX switches at a remote branch. The switches are factory-default and will be connected to the network with DHCP available. The engineer wants the switches to automatically appear in the correct Mist organization without any manual intervention at each device. Which configuration must be in place for ZTP to succeed?

An LLDP profile on the upstream switch that advertises the Mist organization ID

A DHCP option 43 or option 60 that points the switch to the Mist cloud and a DNS record for the Mist redirect host

A static IP address configured on each switch and a manual entry in the Mist inventory

A RADIUS server configured with the Mist cloud as the authentication source

A switch is showing as 'Adopted' but not 'Configured' in the Mist dashboard. The administrator has assigned the switch to a site and applied a configuration template. What is the most likely reason the switch is not configured?

The switch is not compatible with the configuration template

The switch's serial number is incorrect

The switch is not connected to the network

The switch has not yet received the configuration push

A switch is showing as 'Connected' but the configuration version is not updating after a change was made in Mist. The administrator has verified that the switch can reach the Mist cloud. What is the most likely cause?

The switch is in a 'Configuring' state and the push is still in progress

The switch is not assigned to a site, so it is not receiving configuration pushes

The switch has a hardware issue that prevents configuration updates

The configuration change was made at the organization level, but the switch is assigned to a site with a conflicting template

Which of the following is a prerequisite for zero-touch provisioning of a switch?

The switch must be physically located in the same room as the Mist controller

The switch must have network connectivity to the Mist cloud

The switch must be assigned a static IP address by an administrator

The switch must be manually configured via console

Juniper NetworksCertified Specialist, Mist AI Wired (JNCIS-MistAI)

Domain 2Objective 1

Provisioning Process JN0-460 Practice Questions (Page 3)

Part of the Wired Assurance Provisioning or Deployment domain, which makes up ~27% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~9–16 in this domain), expect 1–2 from this objective — we provide 29 practice questions to prepare you well beyond it. (estimate)

29questions here

6free pages

8concepts

Questions 11–15

11application · medium
An administrator is creating a configuration template for a new switch deployment. The template needs to include port profiles for access ports and uplink ports. What is the correct way to include port profiles in the template?
Select an answer first
12application · medium
A network engineer is deploying 50 new EX switches at a remote branch. The switches are factory-default and will be connected to the network with DHCP available. The engineer wants the switches to automatically appear in the correct Mist organization without any manual intervention at each device. Which configuration must be in place for ZTP to succeed?
Select an answer first
13application · medium
A switch is showing as 'Adopted' but not 'Configured' in the Mist dashboard. The administrator has assigned the switch to a site and applied a configuration template. What is the most likely reason the switch is not configured?
Select an answer first
14expert · hard
A switch is showing as 'Connected' but the configuration version is not updating after a change was made in Mist. The administrator has verified that the switch can reach the Mist cloud. What is the most likely cause?
Select an answer first
15foundation · easy
Which of the following is a prerequisite for zero-touch provisioning of a switch?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-460

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-460” is a trademark of its owner, used for identification only.