A switch has been provisioned with a port profile that sets ports 1-24 to VLAN 100. The administrator now needs to change ports 1-12 to VLAN 200. What is the most efficient way to make this change?

Manually configure ports 1-12 via the CLI

Delete the existing port profile and recreate it with the new VLAN for all ports

Edit the existing port profile to change the VLAN to 200 and apply it to ports 1-12

Create a new port profile for VLAN 200 and apply it to ports 1-12

What is the primary purpose of applying a configuration template to a switch during provisioning?

To generate a unique serial number for the switch

To standardize settings across multiple switches

To monitor the switch's real-time traffic

A switch has been provisioned and is showing as 'Connected' in the Mist dashboard. However, the administrator notices that the configuration version is older than the latest version. What does this indicate?

The switch is disconnected from the Mist cloud

The switch is not assigned to a site

The switch has not received the latest configuration push

The switch has a hardware issue

A company is deploying 100 switches across 10 branches. They want to use ZTP to minimize manual effort. However, the DHCP servers at some branches do not support option 43 or 60. What is the best alternative to achieve ZTP for those branches?

Use DNS-based adoption by configuring a DNS record for the Mist redirect host

Manually adopt each switch by adding its serial number to Mist

Use LLDP to advertise the Mist cloud to the switches

Configure a static IP on each switch and use manual adoption

A switch is showing as 'Unassigned' in the Mist dashboard. The administrator wants to provision the switch to a specific site. What is the first step?

Reboot the switch to force it to re-adopt

Configure the switch's management IP address

Assign the switch to the site in the Mist dashboard

Create a configuration template and apply it to the switch

Juniper NetworksCertified Specialist, Mist AI Wired (JNCIS-MistAI)

Domain 2Objective 1

Provisioning Process JN0-460 Practice Questions (Page 2)

Part of the Wired Assurance Provisioning or Deployment domain, which makes up ~27% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~9–16 in this domain), expect 1–2 from this objective — we provide 29 practice questions to prepare you well beyond it. (estimate)

29questions here

6free pages

8concepts

Questions 6–10

6application · medium
A switch has been provisioned with a port profile that sets ports 1-24 to VLAN 100. The administrator now needs to change ports 1-12 to VLAN 200. What is the most efficient way to make this change?
Select an answer first
7foundation · easy
What is the primary purpose of applying a configuration template to a switch during provisioning?
Select an answer first
8application · medium
A switch has been provisioned and is showing as 'Connected' in the Mist dashboard. However, the administrator notices that the configuration version is older than the latest version. What does this indicate?
Select an answer first
9expert · hard
A company is deploying 100 switches across 10 branches. They want to use ZTP to minimize manual effort. However, the DHCP servers at some branches do not support option 43 or 60. What is the best alternative to achieve ZTP for those branches?
Select an answer first
10application · medium
A switch is showing as 'Unassigned' in the Mist dashboard. The administrator wants to provision the switch to a specific site. What is the first step?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-460

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-460” is a trademark of its owner, used for identification only.