Provisioning Options JN0-460 Practice Questions (Page 5)

Questions 21–24

1. 21application · medium

   A company is deploying 200 EX2300 switches across multiple remote sites. The switches are shipped directly to the sites and will be installed by local technicians who have no networking expertise. The company wants the switches to automatically provision and join the correct site in the Mist portal without any manual configuration at the site. The switches will be connected to a network with internet access and a DHCP server. What must be configured in advance to ensure this works?

   • AConfigure the switches with a static IP and the Mist cloud URL before shipping them to the sites.
   • BClaim the switches in the Mist portal, assign them to the correct sites, and ensure the DHCP server provides option 43 with the Mist cloud URL.
   • CProvide the technicians with the Mist cloud URL and activation code to enter via the console port at each site.
   • DEnable LLDP on the switches and configure the upstream routers to advertise the Mist cloud URL.
   Reveal Solution Discussion Select an answer first
2. 22foundation · easy

   What is the correct sequence for provisioning a device using the Mist portal?

   • AClaim the device, apply a template, and then assign it to a site.
   • BClaim the device, assign it to a site, and apply a template.
   • CAssign the device to a site, apply a template, and then claim it.
   • DApply a template, claim the device, and assign it to a site.
   Reveal Solution Discussion Select an answer first
4. 23application · medium

   A company is deploying switches to 20 remote sites. Each site has a different VLAN design and configuration requirements. The switches are factory-default and will be shipped directly to the sites. The company wants the switches to automatically provision and receive the correct site-specific configuration. The DHCP servers at each site are configured to provide option 43. What must the company do in the Mist portal to ensure each switch gets the right configuration?

   • AClaim all switches, assign them to their respective sites, and apply the appropriate configuration template to each site.
   • BClaim all switches and apply a single global configuration template that works for all sites.
   • CClaim all switches and assign them to a single site, then use per-device configuration overrides.
   • DClaim all switches and let the DHCP server's option 43 determine the site configuration.
   Reveal Solution Discussion Select an answer first
5. 24application · medium

   A technician has deployed a new EX2300 switch at a branch office. The switch is factory-default and connected to the network. The technician expected the switch to automatically provision via ZTP, but the switch remains unclaimed in the Mist portal. The switch has been powered on for 30 minutes. What is the most likely cause of this issue?

   • AThe switch was not assigned to a site in the Mist portal before deployment.
   • BThe switch's firmware is too old to support ZTP.
   • CThe DHCP server is not providing option 43 with the Mist cloud URL.
   • DThe switch is not connected to the Mist cloud because the management VLAN is not configured.
   Reveal Solution Discussion Select an answer first