Provisioning Options JN0-460 Practice Questions (Page 2)

Questions 6–10

1. 6foundation · easy

   What is the purpose of applying a template to a device in the Mist portal?

   • ATo change the device's physical location.
   • BTo apply a consistent set of configuration settings to the device.
   • CTo generate a unique activation code for the device.
   • DTo update the device's firmware to the latest version.
   Reveal Solution Discussion Select an answer first
2. 7application · medium

   An organization has a mixed environment with Juniper EX switches and third-party access switches. The Juniper switches are connected to a Mist-managed network, and the engineer wants the Juniper switches to automatically discover the Mist cloud and provision themselves. The network does not have a DHCP server, and the switches cannot be manually configured. Which provisioning method should the engineer rely on?

   • ADHCP-based provisioning, using a statically assigned IP address on the management interface.
   • BManual provisioning via the console port, configuring the Mist cloud URL and activation code.
   • CZTP using DNS-based discovery, where the switch resolves a well-known hostname to find the Mist cloud.
   • DLLDP-based provisioning, where the upstream Mist-managed switch advertises the Mist cloud information via LLDP.
   Reveal Solution Discussion Select an answer first
4. 8foundation · easy

   How does DHCP-based provisioning deliver configuration to a Juniper Mist wired device?

   • ABy configuring the switch to act as a DHCP server for downstream clients.
   • BBy embedding Mist cloud connection details in DHCP options that the device reads during its DHCP request.
   • CBy using DHCP to assign a static IP address that the Mist cloud uses to push configuration.
   • DBy using DHCP to download a full configuration file from a TFTP server.
   Reveal Solution Discussion Select an answer first
5. 9application · medium

   A network engineer is setting up DHCP-based provisioning for a new site. The site has a Windows DHCP server. The engineer has claimed the switches in the Mist portal and assigned them to the site. The switches are factory-default and will be connected to the access VLAN. What additional configuration is required on the DHCP server to enable the switches to provision automatically?

   • AAdd DHCP option 43 with the Mist cloud URL as a server-level or scope-level option.
   • BCreate a DHCP reservation for each switch based on its MAC address.
   • CConfigure the DHCP server to assign a static route to the Mist cloud.
   • DAdd DHCP option 66 with the TFTP server address to boot the switch from a configuration file.
   Reveal Solution Discussion Select an answer first
6. 10application · medium

   A network engineer is deploying 50 EX2300 switches at a new branch office. The switches are factory-default and will be connected to a network where the Mist cloud is reachable. The engineer wants the switches to automatically discover the Mist cloud and download their configuration without any manual CLI access. The DHCP server on the branch network is managed by a third-party appliance that supports custom DHCP options. Which configuration should the engineer implement to meet this requirement?

   • AManually configure the Mist cloud URL on each switch via the CLI, then reboot the switches to trigger automatic configuration download.
   • BConfigure DHCP option 43 on the third-party DHCP server with the Mist cloud URL and enable DHCP-based provisioning on the switches.
   • CConfigure DHCP option 66 on the third-party DHCP server with the Mist cloud URL and enable LLDP-based provisioning on the switches.
   • DEnable LLDP on the switches and configure the upstream switch to advertise the Mist cloud URL in LLDP TLVs.
   Reveal Solution Discussion Select an answer first