Which factor is used as the primary criterion in the OSPF DR/BDR election process?

The highest OSPF interface priority

The lowest OSPF interface priority

Two OSPF routers on a broadcast segment are in the 2-Way state. What does this state indicate about the adjacency between them?

They have exchanged Hello packets and are eligible to become fully adjacent, but they will not form a full adjacency because they are not the DR or BDR.

They have detected a dead neighbor and are removing it from the database.

They have completed database synchronization and are exchanging routing information.

They have elected a DR and BDR and are ready to exchange DBD packets.

What is the primary function of an Autonomous System Boundary Router (ASBR) in OSPF?

To redistribute routes from external routing protocols or static routes into the OSPF domain

To maintain the link-state database for the backbone area

To summarize routes between different OSPF areas

To elect the Designated Router on a multi-access network

Juniper NetworksCertified Specialist, Enterprise Routing and Switching (JNCIS-ENT)

Domain 5Objective 1

OSPF Fundamentals JN0-352 Practice Questions (Page 4)

Part of the OSPF domain, which makes up ~4% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~1–2 in this domain), expect 1–1 from this objective — we provide 29 practice questions to prepare you well beyond it. (estimate)

29questions here

6free pages

9concepts

Questions 16–20

16foundation · easy
Which factor is used as the primary criterion in the OSPF DR/BDR election process?
Select an answer first
17application · medium
Two OSPF routers on a broadcast segment are in the 2-Way state. What does this state indicate about the adjacency between them?
Select an answer first
18foundation · easy
What is the primary function of an Autonomous System Boundary Router (ASBR) in OSPF?
Select an answer first
19application · medium
A network engineer is troubleshooting an OSPF adjacency that is stuck in the ExStart state between two routers on a point-to-point link. The engineer verifies that both routers have the same MTU, area ID, and authentication settings. Which OSPF packet type is most likely being exchanged incorrectly or not at all, causing this state?
Select an answer first
20foundation · easy
Which OSPF LSA type is originated by a Designated Router (DR) to describe the routers connected to a multi-access network?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-352

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-352” is a trademark of its owner, used for identification only.

OSPF Fundamentals JN0-352 Practice Questions (Page 4)

Questions 16–20

Which factor is used as the primary criterion in the OSPF DR/BDR election process?

Two OSPF routers on a broadcast segment are in the 2-Way state. What does this state indicate about the adjacency between them?

What is the primary function of an Autonomous System Boundary Router (ASBR) in OSPF?

Which OSPF LSA type is originated by a Designated Router (DR) to describe the routers connected to a multi-access network?

Keep studying — OSPF