Which Junos configuration stanza correctly applies a routing policy named 'filter-routes' as an OSPF export policy?

set policy-options policy-statement filter-routes then ospf-export

set routing-options ospf export filter-routes

set protocols ospf import filter-routes

set protocols ospf export filter-routes

An engineer is troubleshooting an OSPF neighbor that is stuck in the ExStart state. The two routers are connected via a broadcast network. Which configuration is most likely to resolve the issue?

Increase the dead interval on both routers.

Verify that both routers have the same MTU on the interface.

Set the OSPF network type to point-to-point on both interfaces.

Configure the same OSPF area on both interfaces.

Which Junos configuration stanza correctly assigns interface ge-0/0/1 to OSPF area 1?

set protocols ospf interface ge-0/0/1 area 1

set routing-options ospf area 1 interface ge-0/0/1

set interfaces ge-0/0/1 unit 0 family inet ospf area 1

set protocols ospf area 1 interface ge-0/0/1

Juniper NetworksCertified Specialist, Enterprise Routing and Switching (JNCIS-ENT)

Domain 5Objective 2

OSPF Configuration and Troubleshooting JN0-352 Practice Questions (Page 2)

Part of the OSPF domain, which makes up ~4% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~1–2 in this domain), expect 1–1 from this objective — we provide 11 practice questions to prepare you well beyond it. (estimate)

11questions here

3free pages

7concepts

Questions 6–10

6application · easy
An engineer is verifying OSPF operation on a router. The engineer wants to see the current state of all OSPF neighbors and their corresponding interfaces. Which command provides this information?
Select an answer first
7foundation · easy
Which Junos configuration stanza correctly applies a routing policy named 'filter-routes' as an OSPF export policy?
Select an answer first
8application · medium
An engineer is troubleshooting an OSPF neighbor that is stuck in the ExStart state. The two routers are connected via a broadcast network. Which configuration is most likely to resolve the issue?
Select an answer first
9foundation · easy
Two OSPF routers are stuck in the ExStart state. Which configuration mismatch is the most likely cause?
Select an answer first
10foundation · easy
Which Junos configuration stanza correctly assigns interface ge-0/0/1 to OSPF area 1?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-352

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-352” is a trademark of its owner, used for identification only.

OSPF Configuration and Troubleshooting JN0-352 Practice Questions (Page 2)

Questions 6–10

An engineer is verifying OSPF operation on a router. The engineer wants to see the current state of all OSPF neighbors and their corresponding interfaces. Which command provides this information?

Which Junos configuration stanza correctly applies a routing policy named 'filter-routes' as an OSPF export policy?

An engineer is troubleshooting an OSPF neighbor that is stuck in the ExStart state. The two routers are connected via a broadcast network. Which configuration is most likely to resolve the issue?

Two OSPF routers are stuck in the ExStart state. Which configuration mismatch is the most likely cause?

Which Junos configuration stanza correctly assigns interface ge-0/0/1 to OSPF area 1?

Keep studying — OSPF