Juniper NetworksCertified Specialist, Enterprise Routing and Switching (JNCIS-ENT)
Domain 4Objective 6
Configure, Monitor, or Troubleshoot Protocol-Independent Routing Components JN0-352 Practice Questions (Page 3)
Part of the Protocol Independent Routing domain, which makes up ~10% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–6 in this domain), expect 1–1 from this objective — we provide 30 practice questions to prepare you well beyond it. (estimate)
30questions here
6free pages
17concepts
Questions 11–15
- 11
What is a common method to prevent routing loops when redistributing routes between protocols?
Select an answer first - 12
A router has two static routes to the same destination 10.0.0.0/8. Route A has next-hop 192.0.2.1 with preference 5. Route B has next-hop 198.51.100.1 with preference 10. Both next-hops are reachable. What will the router do with traffic destined to 10.0.0.0/8?
Select an answer first - 13
A routing policy is not matching the expected routes. Which Junos command would you use to test the policy against a specific route?
Select an answer first - 14
Which Junos command is used to view the contents of a trace log file?
Select an answer first - 15
A static route to 10.0.0.0/8 is configured with next-hop 192.168.1.1, but the route is not appearing in the routing table. What is the most likely cause?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-352” is a trademark of its owner, used for identification only.