Juniper NetworksCertified Specialist, Enterprise Routing and Switching (JNCIS-ENT)
Domain 4Objective 6
Configure, Monitor, or Troubleshoot Protocol-Independent Routing Components JN0-352 Practice Questions (Page 2)
Part of the Protocol Independent Routing domain, which makes up ~10% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–6 in this domain), expect 1–1 from this objective — we provide 30 practice questions to prepare you well beyond it. (estimate)
30questions here
6free pages
17concepts
Questions 6–10
- 6
Which Junos operational command displays the current status and next hop of a specific static route?
Select an answer first - 7
When configuring OSPF on a Junos device, which configuration statement correctly enables OSPF on interface ge-0/0/1.0 within the default routing instance?
Select an answer first - 8
An administrator applied a routing policy to a BGP group to filter routes. After the change, the router stops advertising a specific prefix to a peer, but the prefix is still in the routing table. The administrator verifies the policy is correct and the prefix matches the 'from' condition. What is the most likely reason the prefix is not being advertised?
Select an answer first - 9
Which Junos command would you use to see if OSPF is receiving hello packets from a neighbor?
Select an answer first - 10
A BGP neighbor is flapping (going up and down). Which Junos command would you use to see the reason for the flapping?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-352” is a trademark of its owner, used for identification only.