What is the purpose of configuring Virtual Chassis ports (VCPs) on member switches?

To interconnect member switches for control and data traffic

To connect the Virtual Chassis to the internet

To connect to a storage area network

To provide out-of-band management access

A company runs a two-member Virtual Chassis in its data center. The master member experiences a hardware failure and stops forwarding traffic. The backup member is healthy. Which statement best describes the expected behavior?

The backup member automatically takes over as master, and traffic forwarding continues with minimal disruption.

The Virtual Chassis becomes non-operational until the failed member is replaced.

Traffic forwarding continues, but all interfaces on the backup member are shut down to prevent loops.

The backup member continues forwarding traffic but cannot manage the Virtual Chassis until the master is replaced.

A company is deploying a Virtual Chassis with three members. The members are located in different racks. The administrator is concerned about the risk of a split-brain scenario if the inter-member links fail. What is the best way to mitigate this risk?

Use a single VCP link to simplify the configuration.

Use multiple VCP links between the members to provide redundancy.

Enable spanning tree on the VCP links to prevent loops.

Configure a higher mastership priority on one member to ensure it always wins.

Which component is responsible for running the control plane protocols in a Virtual Chassis?

Each line-card member's local CPU

The Virtual Chassis control link

Juniper NetworksCertified Specialist, Enterprise Routing and Switching (JNCIS-ENT)

Domain 9Objective 2

Chassis Clustering and Virtualization JN0-352 Practice Questions (Page 4)

Part of the High Availability domain, which makes up ~12% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–7 in this domain), expect 1–1 from this objective — we provide 22 practice questions to prepare you well beyond it. (estimate)

22questions here

5free pages

5concepts

Questions 16–20

16foundation · easy
What is the purpose of configuring Virtual Chassis ports (VCPs) on member switches?
Select an answer first
17application · medium
A company runs a two-member Virtual Chassis in its data center. The master member experiences a hardware failure and stops forwarding traffic. The backup member is healthy. Which statement best describes the expected behavior?
Select an answer first
18foundation · easy
Which command displays the current status of all members in a Virtual Chassis?
Select an answer first
19expert · hard
A company is deploying a Virtual Chassis with three members. The members are located in different racks. The administrator is concerned about the risk of a split-brain scenario if the inter-member links fail. What is the best way to mitigate this risk?
Select an answer first
20foundation · easy
Which component is responsible for running the control plane protocols in a Virtual Chassis?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-352

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-352” is a trademark of its owner, used for identification only.