How does Virtual Chassis provide control plane redundancy?

By running multiple routing protocols simultaneously

By having a backup routing engine that takes over if the master fails

By duplicating all data plane traffic to all members

By using a dedicated standby switch for every line-card member

Which command is used to assign a member ID to a switch in a Virtual Chassis?

set virtual-chassis member-id 1

set system virtual-chassis id 1

set interfaces vc-port member-id 1

In a three-member Virtual Chassis, the master member is also the primary routing engine. The backup member is synchronized with the master. If the master fails, what happens to the routing engine functionality?

The Virtual Chassis reboots and all members restart.

The routing engine functionality is lost until the failed member is replaced.

The backup member takes over as the master and assumes the routing engine role.

The linecard members elect a new master from among themselves.

What is the primary purpose of Juniper Virtual Chassis technology in an enterprise network?

To isolate network traffic between different departments

To enable routing between different VLANs on a single switch

To combine multiple switches into a single logical device that is managed as one unit

To provide a dedicated backup link for each switch in the network

Juniper NetworksCertified Specialist, Enterprise Routing and Switching (JNCIS-ENT)

Domain 9Objective 2

Chassis Clustering and Virtualization JN0-352 Practice Questions (Page 3)

Part of the High Availability domain, which makes up ~12% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–7 in this domain), expect 1–1 from this objective — we provide 22 practice questions to prepare you well beyond it. (estimate)

22questions here

5free pages

5concepts

Questions 11–15

11foundation · easy
In a Juniper Virtual Chassis, what is the role of a member switch that is not the master or backup?
Select an answer first
12foundation · easy
How does Virtual Chassis provide control plane redundancy?
Select an answer first
13foundation · easy
Which command is used to assign a member ID to a switch in a Virtual Chassis?
Select an answer first
14application · medium
In a three-member Virtual Chassis, the master member is also the primary routing engine. The backup member is synchronized with the master. If the master fails, what happens to the routing engine functionality?
Select an answer first
15foundation · easy
What is the primary purpose of Juniper Virtual Chassis technology in an enterprise network?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-352

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-352” is a trademark of its owner, used for identification only.