What is the purpose of a generated route in Junos?

To create a route that is automatically redistributed into all routing protocols.

To create a static route that is always installed regardless of reachability.

To create a default or summary route that is installed only when a contributing route exists.

To create a route that is used only for traffic engineering.

Which command would you use to verify that a specific static route is installed in the routing table?

show configuration route 192.168.1.0/24

show route protocol static 192.168.1.0/24

show interfaces route 192.168.1.0/24

Which Junos configuration statement is used to define an aggregate route?

set routing-options static route 192.168.0.0/16 aggregate

set routing-options generate route 192.168.0.0/16

set routing-options aggregate route 192.168.0.0/16

set protocols aggregate route 192.168.0.0/16

In which scenario is using a static route most appropriate?

Connecting a campus network with frequent topology changes.

Connecting two large autonomous systems with many peering points.

Connecting a large enterprise network with multiple redundant paths.

Connecting a stub network to a service provider through a single link.

Which command displays the routing table including static, aggregate, and generated routes?

show configuration routing-options

Juniper NetworksCertified Associate, Data Center

Domain 3Objective 1

Static, Aggregate, and Generated Routes JN0-281 Practice Questions (Page 1)

Part of the Protocol-Independent Routing domain, which makes up ~16% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~6–10 in this domain), expect 1–2 from this objective — we provide 13 practice questions to prepare you well beyond it. (estimate)

13questions here

3free pages

9concepts

Questions 1–5

1foundation · easy
What is the purpose of a generated route in Junos?
Select an answer first
2foundation · easy
Which command would you use to verify that a specific static route is installed in the routing table?
Select an answer first
3foundation · easy
Which Junos configuration statement is used to define an aggregate route?
Select an answer first
4foundation · easy
In which scenario is using a static route most appropriate?
Select an answer first
5foundation · easy
Which command displays the routing table including static, aggregate, and generated routes?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-281

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-281” is a trademark of its owner, used for identification only.