Juniper NetworksCertified Associate, Data Center
Domain 3Objective 5
Filter-Based Forwarding JN0-281 Practice Questions (Page 1)
Part of the Protocol-Independent Routing domain, which makes up ~16% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~6–10 in this domain), expect 1–2 from this objective — we provide 12 practice questions to prepare you well beyond it. (estimate)
12questions here
3free pages
3concepts
Questions 1–5
- 1
In a Junos FBF configuration, which firewall filter action is used to send matching packets to a specific routing instance?
Select an answer first - 2
A network engineer is implementing FBF on a Junos device to send traffic from a specific source subnet (192.168.10.0/24) to a different routing instance named 'CUSTOMER-A'. After applying the firewall filter to the ingress interface, traffic from the source subnet is still being forwarded using the default routing table. Which command should the engineer use to confirm that the filter is actually being evaluated for packets arriving on the interface?
Select an answer first - 3
An administrator is configuring FBF on a Junos device. They have created a routing instance named 'FBF-RI' and a firewall filter named 'FBF-FILTER'. The filter has a term that matches destination address 203.0.113.0/24 and uses the 'then routing-instance FBF-RI' action. After applying the filter to interface ge-0/0/0, traffic to 203.0.113.0/24 is being dropped. Which configuration is most likely missing?
Select an answer first - 4
A network administrator is troubleshooting an FBF configuration on a Junos device. The firewall filter is applied to interface ge-0/0/0, and the routing instance 'FBF-RI' has a static route to the destination. However, traffic from the specified source is not being redirected. Which command would provide the most detailed information about the FBF decision process?
Select an answer first - 5
Which scenario is a typical use case for filter-based forwarding in a Junos environment?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-281” is a trademark of its owner, used for identification only.