Configuration Management JN0-253 Practice Questions (Page 2)

Questions 6–10

1. 6application · medium

   A school district has APs labeled 'Classroom' and 'Admin'. The admin creates a policy that assigns VLAN 10 to 'Classroom' and VLAN 20 to 'Admin'. A new AP is added and labeled 'Classroom'. What VLAN will the new AP receive?

   • AVLAN 10, because the policy for the 'Classroom' label applies to all devices with that label.
   • BNo VLAN, because the new AP must be manually configured.
   • CVLAN 20, because the 'Admin' policy is the most recently created.
   • DBoth VLAN 10 and VLAN 20, and the admin must resolve the conflict.
   Reveal Solution Discussion Select an answer first
2. 7foundation · easy

   In Juniper Mist, what is the purpose of a device-specific override in a configuration template?

   • ATo permanently replace the template with a new one
   • BTo delete the template from the organization
   • CTo apply the template to additional devices
   • DTo customize settings for an individual device while still inheriting the template's other settings
   Reveal Solution Discussion Select an answer first
4. 8foundation · easy

   How are labels used to group devices in Juniper Mist?

   • ABy configuring the same SSID on each device
   • BBy assigning the same label to multiple devices, they can be managed as a group
   • CBy placing devices in the same IP subnet
   • DBy creating a separate VLAN for each label
   Reveal Solution Discussion Select an answer first
5. 9application · medium

   An admin applies a template to 10 APs. After the push, the admin wants to verify that the template settings were successfully applied to all 10 APs. What is the most reliable way to verify this in the Mist dashboard?

   • AUse the 'Site Settings' page to confirm the template is assigned.
   • BReboot all 10 APs and check if they come back online.
   • CCheck the 'Configuration Audit' page to see the last successful config push for each AP.
   • DCheck the 'Device Inventory' page to see if the APs are listed.
   Reveal Solution Discussion Select an answer first
6. 10expert · hard

   A company has a label 'Executive' applied to 20 APs. A policy assigns a special SSID to this label. The admin accidentally deletes the 'Executive' label. What is the immediate impact on the 20 APs?

   • AThe APs retain the special SSID, but the policy is marked as 'orphaned' and remains in effect.
   • BThe APs retain the special SSID configuration because it was already pushed to them.
   • CThe APs lose the special SSID configuration and revert to the default template settings.
   • DThe APs are removed from the network and must be re-adopted.
   Reveal Solution Discussion Select an answer first