A technician is deploying APs at a new site. The APs are powered on and connected to the network, but they do not appear in the Mist portal. The technician has verified that the APs can reach the internet. What should the technician check next?

Confirm that the configuration template is applied.

Check if the APs are assigned to a site.

Verify that the APs are using the correct firmware version.

Ensure that the APs are not blocked by a firewall or proxy.

A network administrator is deploying 200 APs across 10 branch offices. Each branch has a unique SSID and VLAN configuration, but all APs share the same NTP and SNMP settings. The administrator wants to minimize per-device configuration effort. What is the most efficient approach in Juniper Mist?

Create a configuration template that includes both common and site-specific settings, and apply it to all APs.

Create a single configuration template with the common settings, and apply it to all APs after they are assigned to their sites.

Use the default template and then manually configure each AP's SSID and VLAN after onboarding.

Create a separate configuration template for each branch and manually assign each AP to the correct template.

A network administrator has created a configuration template for APs. After applying the template to a site, the APs do not receive the expected SSID configuration. The administrator has verified that the template is correctly configured. What is the most likely cause of this issue?

The template is not compatible with the AP model.

The APs need to be rebooted after applying the template.

The APs are not assigned to the site.

The SSID is configured at the site level, not in the template.

A company is deploying 100 APs across multiple sites. They want to ensure that all APs have the same radio settings and country code, but each site has its own SSID. What is the best way to achieve this in Juniper Mist?

Use the default template and then override the SSID on each AP.

Create a separate template for each site, including the SSID and common settings.

Manually configure each AP with the common settings and SSID.

Create a configuration template with the common radio settings and country code, and apply it to all sites.

An administrator has configured auto provisioning for a new site. When the APs are powered on, they do not appear in the Mist portal. The APs are connected to a network that has a firewall. Which of the following is the most likely cause of the onboarding failure?

The firewall is blocking the APs from reaching the Mist cloud.

The APs are not using the correct firmware version.

The configuration template has not been applied.

The APs are not assigned to a site.

Juniper NetworksCertified Associate, Mist AI

Domain 2Objective 5

Automation and Provisioning JN0-253 Practice Questions (Page 1)

Part of the Juniper Mist Configuration Basics domain, which makes up ~14% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–8 in this domain), expect 1–2 from this objective — we provide 27 practice questions to prepare you well beyond it. (estimate)

27questions here

6free pages

6concepts

Questions 1–5

1expert · hard
A technician is deploying APs at a new site. The APs are powered on and connected to the network, but they do not appear in the Mist portal. The technician has verified that the APs can reach the internet. What should the technician check next?
Select an answer first
2application · medium
A network administrator is deploying 200 APs across 10 branch offices. Each branch has a unique SSID and VLAN configuration, but all APs share the same NTP and SNMP settings. The administrator wants to minimize per-device configuration effort. What is the most efficient approach in Juniper Mist?
Select an answer first
3expert · hard
A network administrator has created a configuration template for APs. After applying the template to a site, the APs do not receive the expected SSID configuration. The administrator has verified that the template is correctly configured. What is the most likely cause of this issue?
Select an answer first
4application · medium
A company is deploying 100 APs across multiple sites. They want to ensure that all APs have the same radio settings and country code, but each site has its own SSID. What is the best way to achieve this in Juniper Mist?
Select an answer first
5expert · hard
An administrator has configured auto provisioning for a new site. When the APs are powered on, they do not appear in the Mist portal. The APs are connected to a network that has a firewall. Which of the following is the most likely cause of the onboarding failure?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-253

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-253” is a trademark of its owner, used for identification only.