Configuration Management JN0-253 Practice Questions (Page 1)

Questions 1–5

1. 1expert · hard

   A company has a label 'Lobby' applied to 5 APs. A policy assigns a captive portal to the 'Lobby' label. The admin needs to temporarily disable the captive portal for one of the Lobby APs for a special event. What is the most efficient way to achieve this without affecting the other Lobby APs?

   • ACreate a device-level override for that specific AP to disable the captive portal.
   • BRemove the 'Lobby' label from that AP and re-add it after the event.
   • CEdit the policy to remove the captive portal and then re-add it after the event.
   • DCreate a new label 'Event-AP' and assign it to the specific AP, then create a policy to disable the captive portal for that label.
   Reveal Solution Discussion Select an answer first
2. 2foundation · easy

   What is the primary purpose of a configuration template in Juniper Mist?

   • ATo provide a real-time view of device status and health
   • BTo create a backup of the current device configuration
   • CTo apply a consistent set of device settings across multiple access points
   • DTo replace the need for device-specific configuration entirely
   Reveal Solution Discussion Select an answer first
4. 3expert · hard

   A university has a label 'Dorm' applied to 100 APs. A policy assigns VLAN 50 to the 'Dorm' label. The admin creates a second policy that assigns VLAN 60 to a new label 'Dorm-East', which is applied to 20 of the 100 Dorm APs. What VLAN will the 20 APs with both labels receive?

   • AVLAN 60, because the more specific label 'Dorm-East' takes precedence.
   • BBoth VLAN 50 and VLAN 60, causing a conflict that must be resolved manually.
   • CNeither VLAN, because the conflict invalidates both policies.
   • DVLAN 50, because the 'Dorm' label was created first.
   Reveal Solution Discussion Select an answer first
5. 4application · medium

   A manufacturing company has 80 APs in two buildings. Building A has 50 APs and Building B has 30 APs. The admin creates a template with the corporate SSID and security settings. The admin wants to apply this template to all APs in Building A only. What is the most efficient way to achieve this?

   • ACreate a separate template for Building B and apply it to those APs.
   • BApply the template to each of the 50 APs individually.
   • CApply the template to all 80 APs and then remove it from the 30 APs in Building B.
   • DCreate a label 'BuildingA', assign it to the 50 APs, and apply the template to the label.
   Reveal Solution Discussion Select an answer first
6. 5expert · hard

   A bank has a template that sets the SSID to 'Bank-Guest' and the VLAN to 100. The admin creates a device-level override for AP-200 to set the SSID to 'Bank-Staff'. Later, the admin applies a label 'Staff-APs' to AP-200, and a policy associated with that label sets the VLAN to 200. What is the final VLAN on AP-200?

   • AThe VLAN is undefined because of the conflict between the template and the policy.
   • BVLAN 100, because the device-level override blocks all other configuration sources.
   • CVLAN 100, because the template is the baseline and overrides only affect the SSID.
   • DVLAN 200, because the policy associated with the label takes precedence over the template.
   Reveal Solution Discussion Select an answer first