An administrator is using auto provisioning to deploy APs to a new office. After onboarding the APs, they notice that the APs are not assigned to the correct site. What is the most likely reason for this issue?

The APs are not compatible with the site's configuration.

The configuration template was not applied.

The APs were not assigned to a site during the onboarding process.

The APs were onboarded using the wrong method.

An administrator is managing a network with multiple sites and wants to move an AP from one site to another. What is the most efficient way to do this in the Mist portal?

Edit the AP's properties and change its site assignment.

Delete the AP from the inventory and re-add it to the new site.

Power off the AP, move it to the new site, and power it on.

Create a new site and manually reconfigure the AP.

What is a common issue that can cause auto provisioning to fail?

The device's serial number contains letters

The device has too many VLANs configured

The device is not assigned to a site

A company is deploying APs to a remote site that has no internet connectivity at the time of installation. The APs will be connected to the internet later. Which onboarding method should the administrator use to ensure the APs are ready to be managed by Mist once connectivity is available?

Power on the APs and wait for them to appear in the portal.

Scan the QR codes on the APs at the remote site.

Use Mist Edge at the remote site to manage the APs locally.

Pre-stage the APs by adding their serial numbers to the inventory and assigning them to the site before shipping.

How are configuration templates used during auto provisioning?

They are used to replace the device's firmware

They are only applied to devices that have been manually configured

They are used to generate unique passwords for each device

They are applied to devices after they are assigned to a site

Juniper NetworksCertified Associate, Mist AI

Domain 2Objective 5

Automation and Provisioning JN0-253 Practice Questions (Page 2)

Part of the Juniper Mist Configuration Basics domain, which makes up ~14% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–8 in this domain), expect 1–2 from this objective — we provide 27 practice questions to prepare you well beyond it. (estimate)

27questions here

6free pages

6concepts

Questions 6–10

6application · medium
An administrator is using auto provisioning to deploy APs to a new office. After onboarding the APs, they notice that the APs are not assigned to the correct site. What is the most likely reason for this issue?
Select an answer first
7application · medium
An administrator is managing a network with multiple sites and wants to move an AP from one site to another. What is the most efficient way to do this in the Mist portal?
Select an answer first
8foundation · easy
What is a common issue that can cause auto provisioning to fail?
Select an answer first
9expert · hard
A company is deploying APs to a remote site that has no internet connectivity at the time of installation. The APs will be connected to the internet later. Which onboarding method should the administrator use to ensure the APs are ready to be managed by Mist once connectivity is available?
Select an answer first
10foundation · easy
How are configuration templates used during auto provisioning?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-253

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-253” is a trademark of its owner, used for identification only.