A company is designing a new branch office and needs to select an SRX platform. The branch will have 50 users and requires 1 Gbps firewall throughput. The company has a standard 19-inch rack in the wiring closet. The engineer is considering the SRX345 and the SRX1500. Which factor is most important in making the final decision?

The SRX345 has a desktop form factor that is easier to install

The SRX345 is a lower-cost, rack-mountable device that meets the 1 Gbps throughput requirement

The SRX1500 provides higher throughput and is more future-proof

The SRX1500 supports redundant power supplies, which is required for the branch

A company is deploying an SRX1500 in a small data center with limited cooling capacity. The device will be placed in a rack with other equipment. The engineer is concerned about heat dissipation and wants to ensure the device operates within its thermal limits. Which action is most appropriate?

Remove the device's cover to improve airflow

Install additional fans inside the SRX1500

Install the SRX1500 in the top of the rack to allow heat to rise away from the device

Ensure the rack has adequate front-to-back airflow and the ambient temperature is within the SRX1500's specified range

A network engineer is troubleshooting an SRX340 that is not passing traffic between two VLANs on the same device. The engineer confirms the security policies are correct and the zones are properly assigned. The engineer then checks the physical interfaces and notices that the link is up but the interface is not receiving any packets. Which hardware component should the engineer inspect next?

The interface transceiver (SFP)

A service provider is deploying SRX345 devices at customer edge locations. The provider needs to offer both copper (10/100/1000) and fiber (1G SFP) handoffs to customers. The provider also needs a dedicated management port for out-of-band access. Which statement about the SRX345's interfaces is correct?

The SRX345 has both copper and SFP ports, plus a dedicated management port

The SRX345 uses the console port as the management port

The SRX345 has only copper ports, so fiber handoffs are not possible

The SRX345 has only SFP ports, so copper handoffs are not possible

Juniper NetworksCertified Associate, Security

Domain 1Objective 3

Hardware JN0-232 Practice Questions (Page 3)

Part of the SRX Series Service Gateways domain, which makes up ~34% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~12–20 in this domain), expect 2–3 from this objective — we provide 22 practice questions to prepare you well beyond it. (estimate)

22questions here

5free pages

6concepts

Questions 11–15

11expert · medium
A company is designing a new branch office and needs to select an SRX platform. The branch will have 50 users and requires 1 Gbps firewall throughput. The company has a standard 19-inch rack in the wiring closet. The engineer is considering the SRX345 and the SRX1500. Which factor is most important in making the final decision?
Select an answer first
12expert · medium
A company is deploying an SRX1500 in a small data center with limited cooling capacity. The device will be placed in a rack with other equipment. The engineer is concerned about heat dissipation and wants to ensure the device operates within its thermal limits. Which action is most appropriate?
Select an answer first
13application · medium
A network engineer is troubleshooting an SRX340 that is not passing traffic between two VLANs on the same device. The engineer confirms the security policies are correct and the zones are properly assigned. The engineer then checks the physical interfaces and notices that the link is up but the interface is not receiving any packets. Which hardware component should the engineer inspect next?
Select an answer first
14application · medium
A service provider is deploying SRX345 devices at customer edge locations. The provider needs to offer both copper (10/100/1000) and fiber (1G SFP) handoffs to customers. The provider also needs a dedicated management port for out-of-band access. Which statement about the SRX345's interfaces is correct?
Select an answer first
15foundation · easy
Which SRX Series model is designed as a high-end chassis system that supports multiple line cards and is typically deployed in data centers or service provider environments?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-232

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-232” is a trademark of its owner, used for identification only.

Hardware JN0-232 Practice Questions (Page 3)

Questions 11–15

A company is deploying an SRX1500 in a small data center with limited cooling capacity. The device will be placed in a rack with other equipment. The engineer is concerned about heat dissipation and wants to ensure the device operates within its thermal limits. Which action is most appropriate?

Which SRX Series model is designed as a high-end chassis system that supports multiple line cards and is typically deployed in data centers or service provider environments?

Keep studying — SRX Series Service Gateways