An administrator is configuring security policies on an SRX. They want to ensure that all traffic from the 'Trust' zone to the 'Untrust' zone is subject to a security policy. Where are security policies enforced in the traffic flow?

On the egress interface, after the packet has been forwarded.

At the point where the packet is processed for a new session, after the source and destination zones are determined.

On the ingress interface, before the packet is assigned to a zone.

At the flow module, which applies the policy to every packet regardless of session state.

What type of information is typically included in an SRX session log?

Source and destination IP addresses, ports, and session duration

A security administrator notices a high volume of incomplete TCP handshakes from a single external IP address to an internal server. They want to configure the SRX to drop these incomplete connections to protect the server. Which configuration should they apply?

Enable logging on the security policy to track the incomplete connections.

Create a security policy that denies traffic from the specific external IP address.

Apply a screen that enables the 'tcp-syn-flood' protection to the Untrust zone.

Configure a NAT rule to translate the external IP address to a null route.

What is the purpose of accounting data generated by the SRX traffic flow?

To track the number of bytes and packets per session for billing or usage monitoring

To store the actual data transmitted in the session

Juniper NetworksCertified Associate, Security

Domain 1Objective 5

Traffic Flow and Security Processing JN0-232 Practice Questions (Page 1)

Part of the SRX Series Service Gateways domain, which makes up ~34% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~12–20 in this domain), expect 2–3 from this objective — we provide 27 practice questions to prepare you well beyond it. (estimate)

27questions here

6free pages

11concepts

Questions 1–5

1foundation · easy
What is the first stage in the traffic flow path of a packet entering an SRX Series device?
Select an answer first
2application · medium
An administrator is configuring security policies on an SRX. They want to ensure that all traffic from the 'Trust' zone to the 'Untrust' zone is subject to a security policy. Where are security policies enforced in the traffic flow?
Select an answer first
3foundation · easy
What type of information is typically included in an SRX session log?
Select an answer first
4application · medium
A security administrator notices a high volume of incomplete TCP handshakes from a single external IP address to an internal server. They want to configure the SRX to drop these incomplete connections to protect the server. Which configuration should they apply?
Select an answer first
5foundation · easy
What is the purpose of accounting data generated by the SRX traffic flow?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-232

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-232” is a trademark of its owner, used for identification only.