What is the purpose of reviewing switch port settings during VxRail network validation?

To confirm that all ports are in access mode

To check that the switch ports have the same IP addresses as the nodes

To ensure that speed, duplex, trunking, and MTU settings match VxRail requirements

To verify that all ports are set to auto-negotiation

After completing manual network validation for a VxRail cluster, the administrator needs to document the results for future troubleshooting. What is the most important information to include in the documentation?

The serial numbers of all VxRail nodes

The IP addresses, VLANs, and test results for each node

The names of the administrators who performed the validation

The date and time of the validation

A VxRail node has two 25GbE ports connected to two separate switches for link aggregation. The LAG is configured on both switches, but the LAG does not come up. The administrator verifies that the cables are connected and the ports are enabled. What should the administrator check next?

Verify that the switch ports are configured for the same speed and duplex

Verify that the node's NIC teaming mode is set to LACP

Verify that the switch ports are in the same VLAN

Verify that the switch ports are not in a spanning-tree blocking state

What is the purpose of performing ping and traceroute tests during VxRail network validation?

To detect latency, packet loss, and routing issues in the network

To confirm that the DNS servers are configured correctly

To ensure that the NTP servers are reachable

To verify the physical cable connections

Dell VxRail Deploy v2

Domain 5Objective 2

Validate the Network Environment Manually VXRAIL-DEPLOY-V2 Practice Questions (Page 5)

Part of the VxRail Network Environment Requirements and Initialization domain, which accounts for 8% of the VXRAIL-DEPLOY-V2 exam.

24questions here

5free pages

10concepts

8%of the exam

10 Concepts in This Objective

Manual validation prerequisites
Physical network connectivity checks
VLAN configuration validation
IP address and subnet verification
DNS and hostname resolution checks
NTP synchronization validation
Switch port configuration review
Link aggregation and bonding validation
Network latency and packet loss testing
Documentation of validation results

Questions 21–24

21foundation · easy
What is the purpose of reviewing switch port settings during VxRail network validation?
Select an answer first
22application · medium
After completing manual network validation for a VxRail cluster, the administrator needs to document the results for future troubleshooting. What is the most important information to include in the documentation?
Select an answer first
23expert · hard
A VxRail node has two 25GbE ports connected to two separate switches for link aggregation. The LAG is configured on both switches, but the LAG does not come up. The administrator verifies that the cables are connected and the ports are enabled. What should the administrator check next?
Select an answer first
24foundation · easy
What is the purpose of performing ping and traceroute tests during VxRail network validation?
Select an answer first

Finished these 4 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to VXRAIL-DEPLOY-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “VXRAIL-DEPLOY-V2” is a trademark of its owner, used for identification only.