During manual validation, the administrator runs a continuous ping from a VxRail node to the gateway IP. The ping is successful, but the response times vary from 1ms to 200ms. What should the administrator do next?

Run a traceroute to identify the path and potential bottlenecks

Verify that the VLAN is correctly configured on the switch

Verify that the gateway IP is correct

Verify that the node's IP address is correct

What should be included in the documentation of network validation results?

The date, the tester's name, the commands run, and the output or pass/fail status

The version of the VxRail software

Only the IP addresses of the nodes

The serial numbers of the switches

What is the purpose of DNS and hostname resolution checks in VxRail network validation?

To verify that the DNS servers are using the same IP address as the nodes

To check that the DNS servers are located on the same subnet as the nodes

To ensure that all VxRail node hostnames resolve to the correct IP addresses and that DNS servers are reachable

To confirm that all nodes have the same hostname

During manual validation, the administrator runs 'nslookup node1.vxlab.local' from a VxRail node and receives the correct IP address. However, when the administrator pings 'node1.vxlab.local', the ping fails. What is the most likely cause?

The DNS server is unreachable from the node

The node's hostname is not in the DNS server's forward lookup zone

The node's IP address is not reachable from the source node

The node's subnet mask is incorrect

Dell VxRail Deploy v2

Domain 5Objective 2

Validate the Network Environment Manually VXRAIL-DEPLOY-V2 Practice Questions (Page 4)

Part of the VxRail Network Environment Requirements and Initialization domain, which accounts for 8% of the VXRAIL-DEPLOY-V2 exam.

24questions here

5free pages

10concepts

8%of the exam

10 Concepts in This Objective

Manual validation prerequisites
Physical network connectivity checks
VLAN configuration validation
IP address and subnet verification
DNS and hostname resolution checks
NTP synchronization validation
Switch port configuration review
Link aggregation and bonding validation
Network latency and packet loss testing
Documentation of validation results

Questions 16–20

16foundation · easy
Which command is used to display the IP address, subnet mask, and default gateway on a Linux-based VxRail node?
Select an answer first
17application · medium
During manual validation, the administrator runs a continuous ping from a VxRail node to the gateway IP. The ping is successful, but the response times vary from 1ms to 200ms. What should the administrator do next?
Select an answer first
18foundation · easy
What should be included in the documentation of network validation results?
Select an answer first
19foundation · easy
What is the purpose of DNS and hostname resolution checks in VxRail network validation?
Select an answer first
20application · medium
During manual validation, the administrator runs 'nslookup node1.vxlab.local' from a VxRail node and receives the correct IP address. However, when the administrator pings 'node1.vxlab.local', the ping fails. What is the most likely cause?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to VXRAIL-DEPLOY-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “VXRAIL-DEPLOY-V2” is a trademark of its owner, used for identification only.