Which of the following is a typical step in verifying physical connectivity for a VxRail node?

Pinging the default gateway from the node

Reviewing the VLAN database on the switch

Checking that the link status LEDs on the node's NIC and the corresponding switch port are illuminated

Running a traceroute to a remote server

Why is it important to document the results of manual network validation?

To replace the need for automated validation tools

To provide a reference for troubleshooting and to confirm that all checks were completed

To provide a record for the DHCP server configuration

To satisfy the requirements of the switch vendor

What is the primary purpose of verifying physical network connectivity between VxRail nodes and switches?

To ensure that all cables are properly seated and link lights indicate an active connection

To confirm that the correct VLANs are configured on the switch ports

To verify that the IP addresses are in the correct subnet

To test the throughput of the network links

What is the purpose of verifying IP address and subnet settings on VxRail nodes?

To check that the default gateway is the same as the node's IP address

To confirm that all nodes use the same IP address for management

To ensure that each node has a unique IP address in the correct subnet and can reach its gateway

To verify that the subnet mask is set to /24 for all networks

Dell VxRail Deploy v2

Domain 5Objective 2

Validate the Network Environment Manually VXRAIL-DEPLOY-V2 Practice Questions (Page 3)

Part of the VxRail Network Environment Requirements and Initialization domain, which accounts for 8% of the VXRAIL-DEPLOY-V2 exam.

24questions here

5free pages

10concepts

8%of the exam

10 Concepts in This Objective

Manual validation prerequisites
Physical network connectivity checks
VLAN configuration validation
IP address and subnet verification
DNS and hostname resolution checks
NTP synchronization validation
Switch port configuration review
Link aggregation and bonding validation
Network latency and packet loss testing
Documentation of validation results

Questions 11–15

11foundation · easy
Which command is used to view the status of a bonded interface on a Linux-based VxRail node?
Select an answer first
12foundation · easy
Which of the following is a typical step in verifying physical connectivity for a VxRail node?
Select an answer first
13foundation · easy
Why is it important to document the results of manual network validation?
Select an answer first
14foundation · easy
What is the primary purpose of verifying physical network connectivity between VxRail nodes and switches?
Select an answer first
15foundation · easy
What is the purpose of verifying IP address and subnet settings on VxRail nodes?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to VXRAIL-DEPLOY-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “VXRAIL-DEPLOY-V2” is a trademark of its owner, used for identification only.