Which hardware components are typically included in a standard VxRail cluster node?

A separate storage array, compute servers, and a management switch

A firewall appliance and a load balancer

Compute, storage, and networking components integrated into a single 1U or 2U appliance

A rack-mounted UPS and a KVM console

A VxRail cluster is being deployed with a mix of 10GbE and 25GbE nodes. The top-of-rack switches support both speeds. What is the recommended cabling practice?

Connect all nodes using 10GbE cables to ensure consistency.

Use 10GbE cables for management and 25GbE for data.

Connect each node using the highest speed it supports.

Use 25GbE cables for all nodes, even if the node only supports 10GbE.

In a VxRail cluster, what is the typical role of the top-of-rack (ToR) switches?

Provide external network connectivity for the cluster's management, vSAN, and VM traffic

Provide power distribution to the VxRail nodes

Act as the cluster's management interface

A VxRail cluster is being deployed with four nodes and two top-of-rack switches. The switches are not stacked. During physical verification, the technician finds that node 1's uplink to switch 2 is not connected. What is the best course of action?

Proceed with initialization because the cluster can still function with one uplink per node.

Connect the missing uplink before proceeding with initialization.

Move the existing uplink from switch 1 to switch 2 to balance the load.

Ignore the missing uplink and continue with initialization, then fix it later.

Dell VxRail Deploy v2

Domain 4Objective 2

Installing and Cabling VxRail Cluster Hardware VXRAIL-DEPLOY-V2 Practice Questions (Page 4)

Part of the VxRail Hardware Installation and Initialization domain, which accounts for 8% of the VXRAIL-DEPLOY-V2 exam.

19questions here

4free pages

4concepts

8%of the exam

Questions 16–19

16foundation · easy
Which hardware components are typically included in a standard VxRail cluster node?
Select an answer first
17application · medium
A VxRail cluster is being deployed with a mix of 10GbE and 25GbE nodes. The top-of-rack switches support both speeds. What is the recommended cabling practice?
Select an answer first
18foundation · easy
In a VxRail cluster, what is the typical role of the top-of-rack (ToR) switches?
Select an answer first
19expert · hard
A VxRail cluster is being deployed with four nodes and two top-of-rack switches. The switches are not stacked. During physical verification, the technician finds that node 1's uplink to switch 2 is not connected. What is the best course of action?
Select an answer first

Finished these 4 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to VXRAIL-DEPLOY-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “VXRAIL-DEPLOY-V2” is a trademark of its owner, used for identification only.