What is a recommended validation check after completing a VxRail installation?

Confirm that vSAN health checks pass and all disks are healthy

Verify that all nodes have the same BIOS version

Verify that all nodes have the same hostname format

Ensure that the cluster is registered with Dell ProSupport

A company is deploying a VxRail cluster in a remote office with limited power capacity. The administrator must ensure the installation can proceed without overloading the power circuits. The cluster will have four nodes, each with dual power supplies. What is the best practice for power cabling?

Connect only one power supply per node to reduce power consumption.

Connect each power supply to a different PDU to distribute the load.

Use a power strip instead of a PDU to save cost.

Connect all power supplies to a single PDU to simplify the setup.

A VxRail cluster is being installed, and the administrator is configuring the physical cabling. What is a best practice for cabling the nodes to the network switches?

Connect all nodes to a single switch to simplify the cabling.

Use crossover cables for all connections to reduce cost.

Connect the iDRAC ports to the same switch as the data ports.

Connect each node's network ports to the appropriate switches with redundant links.

When would a manual installation procedure be used instead of the VxRail Appliance installer?

When the customer wants to use a non-Dell switch

When the VxRail Appliance installer is not available or supported for the environment

When the customer requires a fully automated deployment

When the cluster has more than 16 nodes

Which cabling practice is recommended for a VxRail installation to ensure high availability?

Use redundant cabling from each node to two separate switches

Connect the nodes in a daisy-chain topology

Use a single cable for both management and vSAN traffic

Connect all nodes to a single top-of-rack switch

Dell VxRail Deploy v2

Domain 4Objective 1

Describe VxRail System Installation Procedures VXRAIL-DEPLOY-V2 Practice Questions (Page 3)

Part of the VxRail Hardware Installation and Initialization domain, which accounts for 8% of the VXRAIL-DEPLOY-V2 exam.

23questions here

5free pages

4concepts

8%of the exam

Questions 11–15

11foundation · easy
What is a recommended validation check after completing a VxRail installation?
Select an answer first
12expert · medium
A company is deploying a VxRail cluster in a remote office with limited power capacity. The administrator must ensure the installation can proceed without overloading the power circuits. The cluster will have four nodes, each with dual power supplies. What is the best practice for power cabling?
Select an answer first
13application · medium
A VxRail cluster is being installed, and the administrator is configuring the physical cabling. What is a best practice for cabling the nodes to the network switches?
Select an answer first
14foundation · easy
When would a manual installation procedure be used instead of the VxRail Appliance installer?
Select an answer first
15foundation · easy
Which cabling practice is recommended for a VxRail installation to ensure high availability?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to VXRAIL-DEPLOY-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “VXRAIL-DEPLOY-V2” is a trademark of its owner, used for identification only.