A VxRail cluster is being installed with multiple nodes. The administrator is configuring the network settings. What is a best practice for the vSAN network configuration?

Disable jumbo frames on the vSAN network to reduce complexity.

Use the same VLAN as the management network to simplify the configuration.

Use a dedicated VLAN for vSAN traffic and ensure it is isolated from other traffic.

Configure vSAN traffic to use the iDRAC network for better performance.

During a VxRail installation, which task is performed after the VxRail installer completes the cluster deployment?

Validating the installation and cluster health

Connecting the nodes to the network

Powering on the nodes for the first time

Configuring iDRAC network settings

A VxRail cluster installation is about to begin. The administrator has verified the hardware and network prerequisites. Which software prerequisite is required before starting the installation?

The latest VxRail software bundle is downloaded and available.

The vCenter Server is already installed and configured.

The vSAN license key is entered into the VxRail Manager.

The ESXi hosts are already configured with static IP addresses.

The VxRail installer has completed the deployment of the cluster software. The administrator wants to ensure that the installation was successful and that the cluster is ready for production. What is the final step in the installation workflow?

Delete the temporary installation files from the nodes.

Power off all nodes and then power them back on to reset the configuration.

Immediately deploy production workloads to test the cluster.

Run the VxRail validation checks and review the cluster health status.

A VxRail cluster is being installed, and the administrator is configuring the management network. What is a best practice for the management network configuration?

Use the same VLAN as the vSAN network to reduce the number of VLANs.

Use a separate VLAN for management traffic and assign static IP addresses to the nodes.

Assign the management IP addresses from the iDRAC subnet.

Use DHCP for management IP addresses to simplify the configuration.

Dell VxRail Deploy v2

Domain 4Objective 1

Describe VxRail System Installation Procedures VXRAIL-DEPLOY-V2 Practice Questions (Page 2)

Part of the VxRail Hardware Installation and Initialization domain, which accounts for 8% of the VXRAIL-DEPLOY-V2 exam.

23questions here

5free pages

4concepts

8%of the exam

Questions 6–10

6application · medium
A VxRail cluster is being installed with multiple nodes. The administrator is configuring the network settings. What is a best practice for the vSAN network configuration?
Select an answer first
7foundation · easy
During a VxRail installation, which task is performed after the VxRail installer completes the cluster deployment?
Select an answer first
8application · medium
A VxRail cluster installation is about to begin. The administrator has verified the hardware and network prerequisites. Which software prerequisite is required before starting the installation?
Select an answer first
9application · medium
The VxRail installer has completed the deployment of the cluster software. The administrator wants to ensure that the installation was successful and that the cluster is ready for production. What is the final step in the installation workflow?
Select an answer first
10application · medium
A VxRail cluster is being installed, and the administrator is configuring the management network. What is a best practice for the management network configuration?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to VXRAIL-DEPLOY-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “VXRAIL-DEPLOY-V2” is a trademark of its owner, used for identification only.